Biodegradation behaviour of Fe-based alloys in Hanks’ Balanced Salt Solutions: Part II. The evolution of local pH and dissolved oxygen concentration at metal interface
Open Access
- 29 May 2021
- journal article
- research article
- Published by KEAI Publishing in Bioactive Materials
- Vol. 7, 412-425
Abstract
Commercially pure Fe, Fe35Mn, and (Fe35Mn)5Ag alloys were prepared by uniaxial pressing of the mixture of individual powders, followed by sintering. The influence of the alloying elements Mn and Ag on the corrosion behaviour of these Fe-based alloys was investigated in Hanks’ Balanced Salt Solution (HBSS). Furthermore, the role of the components in HBSS, particularly Ca2+ ions during alloys degradation was studied. Distribution of local pH and dissolved oxygen concentration was measured 50 μm above the interface of the degrading alloys. The results revealed that 5 wt% Ag addition to Fe35Mn alloy triggered micro-galvanic corrosion, while uniform corrosion dominated in pure Fe and Fe35Mn. Fast precipitation of Ca–P-containing products on the surface of these Fe-based alloys buffered local pH at the metal interface, and blocked oxygen diffusion at the initial stages of immersion. In the (Fe35Mn)5Ag, the detachment or structural changes of Ca–P-containing products gradually diminished their barrier property. These findings provided valuable insights into the degradation mechanism of promising biodegradable Fe-based alloys.Keywords
Funding Information
- Malta Council for Science and Technology (R&I-2017-037-T)
- China Scholarship Council (201806310128)
This publication has 52 references indexed in Scilit:
- Fe–Mn alloys for metallic biodegradable stents: Degradation and cell viability studies☆Acta Biomaterialia, 2010
- Design strategy for biodegradable Fe-based alloys for medical applications☆Acta Biomaterialia, 2010
- Electroformed pure iron as a new biomaterial for degradable stents: In vitro degradation and preliminary cell viability studies☆Acta Biomaterialia, 2010
- Biocompatibility of pure iron: In vitro assessment of degradation kinetics and cytotoxicity on endothelial cellsMaterials Science and Engineering: C, 2009
- Degradable metallic biomaterials: Design and development of Fe–Mn alloys for stentsJournal of Biomedical Materials Research Part A, 2009
- Monitoring local spatial distribution of Mg2+, pH and ionic currentsElectrochemistry Communications, 2008
- Long-term biocompatibility of a corrodible peripheral iron stent in the porcine descending aortaBiomaterials, 2006
- Non-invasive microelectrode ion flux measurements to study adaptive responses of microorganisms to the environmentFEMS Microbiology Reviews, 2006
- Development of Degradable Fe-35Mn Alloy for Biomedical ApplicationAdvanced Materials Research, 2006
- Scanning electrochemical microscopy. Introduction and principlesAnalytical Chemistry, 1989