Modeling the application of steel slag in stabilizing expansive soil
Open Access
- 23 February 2023
- journal article
- research article
- Published by Springer Nature in Modeling Earth Systems and Environment
- Vol. 9 (4) , 4023-4030
Abstract
The objective of this study was to evaluate the suitability of steel slag as an additive to the engineering properties of weak clay soil. Different geotechnical laboratory tests were conducted on both stabilized and natural soils. Steel slag (SS) was added at a rate of 0, 5, 10, 15, 20, and 25% to the soil. Specific gravity, grain size analysis, Atterberg limit test, compaction test, free swell, California bearing ratio (CBR), and unconfined compression strength (UCS) are among the tests that were performed. The Atterberg limit test result shows that the liquid limit decreases from 90.8 to 65.2%, the plastic limit decreases from 60.3 to 42.5%, and the plasticity index decreases from 30.5 to 22.7% as the steel slag of 25% was added to the expansive soil. With 25% steel slag content, the specific gravity increases from 2.67 to 3.05. The free swell value decreased from 104.6 to 58.2%. In the Standard Proctor compaction test, the maximum dry density rises from 1.504 to 1.692 g/cm3, while optimum moisture content falls from 19.77 to 12.09%. From the UCS test, mixing 25% steel slag into the soil increases the unconfined compressive strength from 64.3 to 170.6 kPa. Additionally, the CBR value increases from 3.64 to 6.82% as 25% of steel slag is mixed with the soil. As a result, steel slag has been found to improve expansive soil properties for geotechnical applications.Keywords
This publication has 34 references indexed in Scilit:
- Soil Modification by the Application of Steel SlagPeriodica Polytechnica Civil Engineering, 2014
- The effects of marble dust and fly ash on clay soilScience and Engineering of Composite Materials, 2013
- Influence of Water Content on Mechanical Properties of Improved Clayey Soil Using Steel SlagGeotechnical and Geological Engineering, 2012
- Threshold moisture content and matric suction potentials in expansive clays prior to initiation of cracking in pavementsCanadian Geotechnical Journal, 2011
- Investigation on phosphogypsum–steel slag–granulated blast-furnace slag–limestone cementConstruction and Building Materials, 2010
- Investigation on the application of steel slag–fly ash–phosphogypsum solidified material as road base materialJournal of Hazardous Materials, 2009
- Highway Subgrade Construction in Expansive Soil AreasJournal of Materials in Civil Engineering, 2009
- Optimization of blended mortars using steel slag sandJournal of Wuhan University of Technology-Mater. Sci. Ed., 2007
- Use of steel slag aggregate in asphalt concrete mixesCanadian Journal of Civil Engineering, 2007
- American Society for Testing and MaterialsNature, 1964