Reflecting on the Mechanical Driving Force of Fatigue Crack Propagation
Authors:
- 1 January 1999
- book chapter
- Published by ASTM International
- p. 474-495
Abstract
The goal of the work to be presented is a fracture mechanics methodology for the description of fatigue crack propagation (FCP) in which the mechanical driving force has a unique relation to FCP. A review of FCP literature leads to two basic premises for FCP, namely that a) ΔK indirectly describes the stress and strain excursions in the plastic zone, and b) tensile stresses and strains in the near crack front region are a necessary condition for FCP. It is shown that closure as defined by Elber can only act like some externally applied tensile load. Therefore, closure cannot be the mechanism that transfers the external cyclic loading condition to the mechanical driving force. A model is proposed which includes the closure mechanism, but the transfer from external cyclic loading to the mechanical driving force is solely due to the stresses and strains in the plastic zone ahead of the crack front, as originally proposed by Schijve. The stress intensity factor at which the stresses and strains in the near crack front region switch from compression to tension during the loading part of a cycle has been experimentally determined for various cyclic loading conditions. This level is denoted as KPR, the crack propagation stress intensity factor, and allows the determination of the mechanical driving force, ΔKeff.Keywords
This publication has 29 references indexed in Scilit:
- The ΔKeff-concept: A unique and complete description of fatigue crack propagationEngineering Fracture Mechanics, 1996
- Determination of the partitioning point dividing ΔK into ΔKeffEngineering Fracture Mechanics, 1996
- A fatigue crack growth thresholdEngineering Fracture Mechanics, 1992
- Messungen der Rißschließeffekte an Al 8090‐T6 und 42CrMo4Materialwissenschaft und Werkstofftechnik, 1990
- The effects of the plastic wake zone on the conditions for fatigue crack propagationInternational Journal of Fracture, 1980
- On the effect of crack closure on the rate of fatigue crack propagationInternational Journal of Fracture, 1977
- The effect of load ratio on the threshold stresses for fatigue crack growth in medium carbon steelsEngineering Fracture Mechanics, 1973
- Crack growth retardation under aircraft spectrum loadsEngineering Fracture Mechanics, 1973
- On the influence of single and multiple peak overloads on fatigue crack propagation in 7075-T6511 aluminumEngineering Fracture Mechanics, 1973
- Fatigue crack closure under cyclic tensionEngineering Fracture Mechanics, 1970