Maintaining Average Torque and Suppressing Torque Ripple With T-Shaped Auxiliary Pole for Spoke Type Multi-Consequent-Pole Motor
- 18 October 2024
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 40 (2) , 1400-1410
Abstract
A novel stator structure for spoke-type multi-consequent-pole motors was proposed in this paper. While spoke-type multi-consequent pole motors were effective to improve torque density, it was necessary to allow for torque ripple increasing due to the non-uniform magnetic flux density in the air gap. Although torque ripple could be reduced using the I-shaped auxiliary pole reported in the previous study, worsen in average torque was needed to be tolerated. In the proposed motor, T-shaped auxiliary poles were placed on the stator to maintain torque and reduce torque ripple. The point of the proposed motor lies in the magnetic circuit in which the stator coil was divided into upper and lower coils, and the leakage flux, which was generated in the previous auxiliary pole, could be picked by the lower coil. To validate its effectiveness, numerical verification was conducted using the verification model and obtained results were compared with the conventional motors. Moreover, experimental verification was conducted using prototype motors. From the results, it was confirmed that torque ripple could be reduced without decreasing average torque by using the proposed stator structure.Keywords
This publication has 19 references indexed in Scilit:
- A Novel Permanent Magnet Vernier Machine With Coding-Shaped ToothIEEE Transactions on Industrial Electronics, 2021
- Flux-Focusing Permanent Magnet Machines With Modular Consequent-Pole RotorIEEE Transactions on Industrial Electronics, 2019
- Analysis of Consequent Pole Spoke Type Vernier Permanent Magnet Machine With Alternating Flux Barrier DesignIEEE Transactions on Industry Applications, 2018
- Design and Performance Comparison of Fractional Slot Concentrated Winding Spoke Type Synchronous Motors With Different Slot-Pole CombinationsIEEE Transactions on Industry Applications, 2018
- Design optimization of spoke-type PM motors for Formula E racing cars2016
- A Spoke-Type IPM Machine With Novel Alternate Airspace Barriers and Reduction of Unipolar Leakage Flux by Step-Staggered RotorIEEE Transactions on Industry Applications, 2016
- Reduction of Cogging Torque Due to Production Tolerances of Rotor by Using Dummy Slots Placed Partially in Axial DirectionIEEE Transactions on Industry Applications, 2015
- Evaluation of Magnetic Suspension Performance in a Multi-Consequent-Pole Bearingless MotorIEEE Transactions on Magnetics, 2011
- Design and Basic Characteristics of Multi-Consequent-Pole Bearingless Motor With Bi-Tooth Main PolesIEEE Transactions on Magnetics, 2009
- Performance analysis and optimization of a permanent-magnet starter motor with auxiliary poles by FEMIEEE Transactions on Magnetics, 2003