The influence of blend composition and filler on the microstructure, crystallization, and mechanical behavior of polymer blends with multilayered structures
Authors:
Open Access
- 2 October 2018
- journal article
- research article
- Published by Taylor & Francis in Nanocomposites
- Vol. 4 (4) , 178-189
Abstract
The preparation of multilayered structures has been thought as a complicated process until our recent study illustrating an effective method through high speed thin wall injection molding (HSTWIM) of polypropylene (PP) and polyethylene (PE) based blends. Current study investigates the effect of blends composition as well as the addition of carbon nanotubes (CNT) on the structure and properties of these blends. It is observed that a close ratio of high density polyethylene (HDPE) and impact copolymer polypropylene (ICP) triggers the formation of a multilayered structure. Meanwhile, PE is migrated into the rubber phase in ICP, leading to the distribution of some rubber phase on the interface between PP and PE, which is thought as beneficial for the interfacial interaction. Meanwhile, epitaxial growth of PE crystals on PP substrate is also observed. The presence of rubber phase on the interface, multilayered structure and epitaxial growth of PE crystals on PP are thought to be responsible for the observed mechanical enhancement in tensile strength as well as strain at break. Furthermore, the addition of CNTs leads to enhanced strength, reduced strain at break and anisotropic conductive network. Graphical AbstractKeywords
This publication has 36 references indexed in Scilit:
- Alternating multilayer structure of polyethylene/polypropylene blends obtained through injection moldingJournal of Applied Polymer Science, 2011
- Structure and Gas Barrier Properties of Poly(propylene-graft-maleic anhydride)/Phosphate Glass Composites Prepared by Microlayer CoextrusionMacromolecules, 2010
- Tough, Bio-Inspired Hybrid MaterialsScience, 2008
- Flexible Transparent Clay Films with Heat‐Resistant and High Gas‐Barrier PropertiesAdvanced Materials, 2007
- Highly transparent flexible clay films modified with organic polymer: structural characterization and intercalation propertiesJournal of Materials Chemistry, 2007
- Freezing as a Path to Build Complex CompositesScience, 2006
- Tensile properties in the oriented blends of high-density polyethylene and isotactic polypropylene obtained by dynamic packing injection moldingPolymer, 2005
- Low-temperature processing of ‘baroplastics’ by pressure-induced flowNature, 2003
- Sprayed Polyelectrolyte MultilayersLangmuir, 2000
- Layer-by-Layer Self-Assembly of Polyelectrolyte-Semiconductor Nanoparticle Composite FilmsThe Journal of Physical Chemistry, 1995