A Low-Intrusion Load and Efficiency Evaluation Method for In-Service Motors Using Vibration Tests With an Accelerometer
- 6 May 2010
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 46 (4) , 1341-1349
Abstract
This paper presents a novel low-intrusion load and efficiency evaluation method for in-service induction motors based on vibration measurements. This method enhances the traditional vibration analysis by providing motor load and efficiency information in addition to the mechanical health information. The application is in multimotor plants, where individual motor monitoring is too expensive to implement yet where motor operating conditions need to be known to work at improved plant efficiency. The vibration signature of the machine, measured by an accelerometer and processed by fast Fourier transform (FFT) is used to extract frequencies defining shaft speed and the supply frequency. This data, in conjunction with the basic motor performance data, enables the determination of the actual load and indirectly, the efficiency which the motor is operating at. For motors supplied form a variable-speed drive (VSD), the loss segregation method is used to yield the motor losses indirectly and thus, the efficiency.Keywords
This publication has 10 references indexed in Scilit:
- A Nonintrusive and In-Service Motor-Efficiency Estimation Method Using Air-Gap Torque With Considerations of Condition MonitoringIEEE Transactions on Industry Applications, 2008
- A survey of efficiency-estimation methods for in-service induction motorsIEEE Transactions on Industry Applications, 2006
- An economical method for induction motor field efficiency estimation for use in on-site energy audit and management2005
- Assessment of Nonintrusive Motor Efficiency EstimatorsIEEE Transactions on Industry Applications, 2005
- International Standards for the Induction Motor Efficiency Evaluation: A Critical Analysis of the Stray-Load Loss DeterminationIEEE Transactions on Industry Applications, 2004
- Practical Approach for Determining Motor Efficiency in the Field Using Calculated and Measured ValuesIEEE Transactions on Industry Applications, 2004
- An accurate low-cost method for determining electric motors efficiency for the purpose of plant energy managementIEEE Transactions on Industry Applications, 2003
- Efficiency of electric motors under practical conditionsPower Engineering Journal, 2001
- Field assessment of induction motor efficiency through air-gap torqueIEEE Transactions on Energy Conversion, 1996
- An FFT-based novel approach to noninvasive speed measurement in induction motor drivesIEEE Transactions on Instrumentation and Measurement, 1992