Numerical study on dynamic characteristics of double droplets impacting a super-hydrophobic tube with different impact velocities
Authors:
- 28 May 2019
- journal article
- research article
- Published by Taylor & Francis in International Journal of Computational Fluid Dynamics
- Vol. 33 (5) , 222-233
Abstract
The coupled level set and volume of fluid method is applied to the numerical study on the successive impact of double droplets on a super-hydrophobic tube. The impact velocity varies from 0.25 to 2 m/s. These impact processes present spread, retract, rebound, breakup and splash. The out-of-phase impact takes place with the impact velocity from 0.25 to 1.25 m/s, while the in-phase impact takes place with the impact velocity from 1.44 to 2 m/s. With the impact velocity larger than 1.25 m/s, the liquid crown presents and deforms after the trailing droplet impact, then it would gather at the film edge, rebound or break up. When impact velocities range from 1.44 to 1.5 m/s, the finger liquid film presents before the liquid crown appearing. The finger head breaks with the impact velocity of 1.5 m/s during the leading droplet spreading. The zigzag liquid film becomes more obvious for larger velocities.Keywords
This publication has 28 references indexed in Scilit:
- A Numerical Investigation on Dynamics and Breakup of Liquid SheetJournal of Fluids Engineering, 2012
- Advances and challenges in explaining fuel spray impingement: How much of single droplet impact research is useful?Progress in Energy and Combustion Science, 2010
- Nonwetting of impinging droplets on textured surfacesApplied Physics Letters, 2009
- A simple large-scale droplet generator for studies of inkjet printingReview of Scientific Instruments, 2008
- Numerical Simulation of Two Droplets Impinging Successively on a Hot Solid in the Film Boiling RegimeISIJ International, 2008
- On the Successive Impingement of Droplets Onto a SubstrateNumerical Heat Transfer, Part A: Applications, 2007
- DROP IMPACT DYNAMICS: Splashing, Spreading, Receding, Bouncing…Annual Review of Fluid Mechanics, 2006
- Fabrication of Superhydrophobic Surfaces by Dislocation-Selective Chemical Etching on Aluminum, Copper, and Zinc SubstratesLangmuir, 2005
- Numerical Simulation of Successive Collision of Two Liquid Droplets with a Solid Wall.ISIJ International, 2001
- Simulation of multicomponent fluids in complex three-dimensional geometries by the lattice Boltzmann methodPhysical Review E, 1996