Location of Faulty Section and Faults in Hybrid Multi-Terminal Lines Based on Traveling Wave Methods
Open Access
Abstract
Traveling-wave-based fault location methods are widely used for modern power systems owing to their high accuracy on two-terminal lines. However, they perform poorly on hybrid multi-terminal lines. Many traveling-wave-based methods have been developed recently to solve this problem, but they have high computational burdens and complex fault location procedures. To tackle this challenge, a new fault location method is presented in this paper. First, to ensure that the implementation of the proposed method is not affected by different line parameters, a normalization algorithm is used for hybrid multi-terminal lines, which consist of overhead lines and cables. To reduce the complexity, a novel fault section identification method that depends only on the first three arrival times is applied to separate a three-terminal fault section from the multi-terminal lines. Consequently, the fault can be located using a corresponding two-terminal fault location method in this fault section. To verify its effectiveness, fault case studies and performance evaluations are performed in the PSCAD and MATLAB/Simulink environment. The simulation results reveal that the proposed method can correctly identify the fault section and accurately locate the faults, which is simple and suitable for hybrid multi-terminal lines.Keywords
Funding Information
- National Natural Science Foundation of China (61433004)
This publication has 36 references indexed in Scilit:
- Transmission line fault location using hybrid wavelet-Prony method and relief algorithmInternational Journal of Electrical Power & Energy Systems, 2014
- Ground fault current analysis with a direct building algorithm for microgrid distributionInternational Journal of Electrical Power & Energy Systems, 2013
- Fault location scheme for a multi-terminal transmission line based on current traveling wavesInternational Journal of Electrical Power & Energy Systems, 2013
- A novel unsymmetrical faults analysis for microgrid distribution systemsInternational Journal of Electrical Power & Energy Systems, 2012
- Travelling wave time–frequency characteristic-based fault location method for transmission linesIET Generation, Transmission & Distribution, 2012
- Unbalanced distribution network fault analysis with hybrid compensationIET Generation, Transmission & Distribution, 2011
- Transmission Network Fault Location Observability With Minimal PMU PlacementIEEE Transactions on Power Delivery, 2006
- Travelling Wave Based Fault Location for Teed CircuitsIEEE Transactions on Power Delivery, 2005
- Fault location using waveletsIEEE Transactions on Power Delivery, 1998
- Equivalent circuit modelling of a capacitive voltage transformer for power system harmonic frequenciesIEEE Transactions on Power Delivery, 1995