Application of a one‐dimensional thermal flame spread model on predicting the rate of heat release in the SBI test
- 1 March 2001
- journal article
- research article
- Published by Wiley in Fire and Materials
- Vol. 25 (2) , 61-70
Abstract
A one‐dimensional thermal flame spread model was applied to predict the rate of heat release in the single burning item (SBI) test on the basis of the cone calorimeter data. The input parameters were selected according to the features of the SBI test and using particle board as a model tuning material. The features of the measured and calculated rate of heat release curves were compared for a series of 33 building products. The fire growth rate (FIGRA) indices were calculated to predict the classification in the forthcoming Euroclass system. The model gave correct classification for 90% of the products studied. An essential feature of the model is that only one cone calorimeter test at the exposure level of 50 kW m−2 is needed. The model, therefore, provides a practical tool for product development and quality control. Copyright © 2001 John Wiley & Sons, Ltd.Keywords
This publication has 9 references indexed in Scilit:
- Upward Flame Spread On Wooden Surface Products: Experiments And Numerical ModellingFire Safety Science, 1997
- CFD and experimental studies of room fire growth on wall lining materialsFire Safety Journal, 1996
- Correlation between cone calorimeter data and time to flashover in the room fire testFire and Materials, 1994
- Models for calculating flame spread on wall lining materials and the resulting heat release rate in a roomFire Safety Journal, 1994
- Rate of heat release and ignitability indices for surface liningsFire and Materials, 1993
- A simulation model for fire growth on materials subject to a room-corner testFire Safety Journal, 1993
- Full‐scale/Bench‐Scale correlations of wall and ceiling liningsFire and Materials, 1992
- On the thermal ignition of combustible materialsFire and Materials, 1989
- Wall Flames and Implications for Upward Flame SpreadCombustion Science and Technology, 1986