Chemical, Thermal, and Rheological Performance of Asphalt Binder Containing Plastic Waste
Authors:
- Rosa VeropalumboRosa Veropalumbo
- Francesca RussoFrancesca Russo
- Cristina OretoCristina Oreto
- Giovanna Giuliana BuonocoreGBGiovanna Giuliana Buonocore
- Letizia VerdolottiLVLetizia Verdolotti
- Herminio MuiamboHMHerminio Muiambo
- Salvatore Antonio BiancardoSalvatore Antonio Biancardo
- Nunzio ViscioneNunzio Viscione
Open Access
- 15 December 2021
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 13 (24) , 13887
Abstract
In order to meet the environmental needs caused by large plastic waste accumulation, in the road construction sector, an effort is being made to integrate plastic waste with the function of polymer into asphalt mixtures; with the purpose of improving the mechanical performance of the pavement layers. This study focuses on the effect of a recycled mixture of plastic waste on the chemical, thermal, and rheological properties of designed asphalt blends and on the identification of the most suitable composition blend to be proposed for making asphalt mixture through a dry modification method. Thermo-gravimetric analysis, differential scanning calorimetry, and Fourier transform infrared spectroscopy analysis were carried out to investigate the effect of various concentrations and dimensions of plastic waste (PW) on the neat binder (NB). The frequency sweep test and the multiple stress creep and recovery test were performed to analyze the viscoelastic behavior of the asphalt blends made up of PW in comparison with NB and a commercial modified bitumen (MB). It has been observed that the presence of various types of plastic materials having different melting temperatures does not allow a total melting of PW powder at the mixing temperatures. However, the addition of PW in the asphalt blend significantly improved the aging resistance without affecting the oxidation process of the plastic compound present in the asphalt blend. Furthermore, when the asphalt blend mixed with 20% PW by the weight of bitumen is adopted into the asphalt mixture as polymer, it improves the elasticity and strengthens the mixture better than the mixture containing MB.Keywords
Funding Information
- Ministry of Education, University and Research (MIUR) of the Italian Government (20174JW7ZL)
This publication has 45 references indexed in Scilit:
- The effect of recycled plastic aggregate on chemico-physical and functional properties of composite mortarsMaterials & Design (1980-2015), 2014
- A sustainable approach: Utilization of waste PVC in asphalting of roadsConstruction and Building Materials, 2014
- Recycling and recovery of PE‐PP‐PET‐based fiber polymeric wastes as aggregate replacement in lightweight mortar: Evaluation of environmental friendly applicationEnvironmental Progress & Sustainable Energy, 2014
- Effect of aggregate types on the performance of neat and EVA-modified asphalt mixturesInternational Journal of Pavement Engineering, 2013
- Rheological properties and stability of ethylene vinyl acetate polymer‐modified bitumenPolymer Engineering & Science, 2013
- Hydration-induced reinforcement of rigid polyurethane–cement foams: The effect of the co-continuous morphology on the thermal-oxidative stabilityPolymer Degradation and Stability, 2013
- Properties of Modified Asphalt Binders Blended with Electronic Waste PowdersJournal of Materials in Civil Engineering, 2012
- Hydration-induced reinforcement of rigid polyurethane–cement foams: mechanical and functional propertiesJournal of Materials Science, 2012
- Study of recycled polyethylene materials as asphalt modifiersCanadian Journal of Civil Engineering, 2006
- Effect of waste polymer addition on the rheology of modified bitumenFuel, 2006