Effects of living cells on the bioink printability during laser printing
Open Access
- 1 May 2017
- journal article
- conference paper
- Published by AIP Publishing in Biomicrofluidics
- Vol. 11 (3) , 034120
Abstract
Laser-induced forward transfer has been a promising orifice-free bioprinting technique for the direct writing of three-dimensional cellular constructs from cell-laden bioinks. In order to optimize the printing performance, the effects of living cells on the bioink printability must be carefully investigated in terms of the ability to generate well-defined jets during the jet/droplet formation process as well as well-defined printed droplets on a receiving substrate during the jet/droplet deposition process. In this study, a time-resolved imaging approach has been implemented to study the jet/droplet formation and deposition processes when printing cell-free and cell-laden bioinks under different laser fluences. It is found that the jetting behavior changes from no material transferring to well-defined jetting with or without an initial bulgy shape to jetting with a bulgy shape/pluming/splashing as the laser fluence increases. Under desirable well-defined jetting, two impingement-based deposition and printing types are identified: droplet-impingement printing and jet-impingement printing with multiple breakups. Compared with cell-free bioink printing, the transfer threshold of the cell-laden bioink is higher while the jet velocity, jet breakup length, and printed droplet size are lower, shorter, and smaller, respectively. The addition of living cells transforms the printing type from jet-impingement printing with multiple breakups to droplet-impingement printing. During the printing of cell-laden bioinks, two non-ideal jetting behaviors, a non-straight jet with a non-straight trajectory and a straight jet with a non-straight trajectory, are identified mainly due to the local nonuniformity and nonhomogeneity of cell-laden bioinks.Keywords
Funding Information
- National Science Foundation (1537956)
- National Institutes of Health
This publication has 68 references indexed in Scilit:
- Laser-induced forward transfer of silver nanoparticle ink: time-resolved imaging of the jetting dynamics and correlation with the printing qualityMicrofluidics and Nanofluidics, 2013
- Impulsively actuated jets from thin liquid films for high-resolution printing applicationsJournal of Fluid Mechanics, 2012
- Study of Process-Induced Cell Membrane Stability in Cell Direct WritingJournal of Manufacturing Science and Engineering, 2011
- Laser Printing of Three-Dimensional Multicellular Arrays for Studies of Cell–Cell and Cell–Environment InteractionsTissue Engineering Part C: Methods, 2011
- Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprintingBioMedical Engineering OnLine, 2011
- Sessile droplet formation in the laser-induced forward transfer of liquids: A time-resolved imaging studyThin Solid Films, 2010
- Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step BioprintingTissue Engineering Part A, 2010
- Scaffold-free vascular tissue engineering using bioprintingBiomaterials, 2009
- Study of Impact-Induced Mechanical Effects in Cell Direct Writing Using Smooth Particle Hydrodynamic MethodJournal of Manufacturing Science and Engineering, 2008
- Red blood cell aggregation and dissociation in shear flows simulated by lattice Boltzmann methodJournal of Biomechanics, 2008