Separation and recovery of iron from a low-grade carbonate-bearing iron ore using magnetizing roasting followed by magnetic separation
- 4 May 2017
- journal article
- research article
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 52 (10) , 1768-1774
Abstract
In this study, a process of magnetizing roasting followed by low-intensity magnetic separation (MR-LMS), which is used to separate and recover iron from a low-grade carbonate-bearing iron ore (containing 34.6 wt.% Fe), was investigated. A magnetic concentrate containing 65.4 wt.% Fe with an iron recovery rate of 92.6 wt.% was obtained under optimal conditions: roasting temperature of 800°C, roasting time of 8 min, bitumite ratio of 10:100, grinding fineness of around 85 wt.% passing 38 µm, and magnetic intensity of 0.12 T. In addition, the phase transformation and magnetic properties were analyzed by X-ray diffraction (XRD) and vibrating sample magnetometry (VSM) to reveal the mechanism.Keywords
Funding Information
- the National Science Foundation of China (51674064 and 51674065)
- the Fundamental Research Funds for the Central Universities of China (N140108001 and N150106003)
This publication has 18 references indexed in Scilit:
- Effect of magnetic pulse pretreatment on grindability of a magnetite ore and its implication on magnetic separationJournal of Central South University, 2016
- Effect of carbonate minerals on quartz flotation behavior under conditions of reverse anionic flotation of iron oresInternational Journal of Mineral Processing, 2016
- Effect and mechanism of dolomite with different size fractions on hematite flotation using sodium oleate as collectorJournal of Central South University, 2016
- Effect and mechanism of siderite on reverse anionic flotation of quartz from hematiteJournal of Central South University, 2016
- Reaction Behavior of Iron Minerals and Metallic Iron Particles Growth in Coal-Based Reduction of an Oolitic Iron OreIndustrial & Engineering Chemistry Research, 2013
- Recovery of iron from vanadium tailings with coal-based direct reduction followed by magnetic separationJournal of Hazardous Materials, 2011
- The flotation of quartz from iron minerals with a combined quaternary ammonium saltInternational Journal of Mineral Processing, 2005
- Magnetic separation of hematite and limonite fines as hydrophobic flocs from iron oresMinerals Engineering, 2002
- A study of iron mineral transformation to reduce red mud tailingsWaste Management, 2001
- Selective flocculation applied to Barsuan iron ore tailingsInternational Journal of Mineral Processing, 1985