Bottom Electrodes for High Dielectric Oxide Compounds: Effects on Crystallization of Lead Containing Ferroelectrics
Authors:
- 1 January 1993
- journal article
- Published by Springer Nature in MRS Proceedings
- Vol. 310
Abstract
Several conductive structures, which appeared to be usable as base electrodes for integrated devices based on high dielectric materials, have been annealed for 30 minutes in oxygen at 650 °C. Similar structures coated with lead-based ferroelectrics deposited by the sol-gel method have been annealed for 1 min in oxygen at higher temperatures. The materials have been characterized by Rutherford backscattering (RBS) and scanning electron microscopy (SEM) and the crystallographic structure of the ferroelectrics films has been determined by X-ray diffractometry (XRD).Only RuO2/Ru has been found to be suitable as an electrode, at temperatures not exceeding 650 °C. It has also been found that the electrode materials can strongly affect the crystallization behavior of the sol-gel ferroelectric films and the formation of single-phase perovskite layers.Keywords
This publication has 6 references indexed in Scilit:
- Base electrodes for high dielectric constant oxide materials in silicon technologyJournal of Materials Research, 1992
- Application of nickel alloy electrode to characterization of crystal oriented PbTiO3thin filmsIntegrated Ferroelectrics, 1992
- Thin‐Layer Dielectrics in the Pb[(Mg 1/3 Nb 2/3 )
1‐
x
Ti
x
]O 3 SystemJournal of the American Ceramic Society, 1991
- SrTiO3 Thin Film Preparation by Ion Beam Sputtering and Its Dielectric PropertiesJapanese Journal of Applied Physics, 1991
- Ferroelectric thin films for electronic applicationsJournal of Vacuum Science & Technology A, 1991
- Ferroelectric PbTiO3 thin films and their applicationInternational Journal of Engineering Science, 1991