Critical position of fatigue damage within asphalt pavement considering temperature and strain distribution
- 11 February 2020
- journal article
- research article
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 22 (14) , 1773-1784
Abstract
The fatigue properties of the asphalt pavement layer are influenced significantly by different strain levels and temperatures. This research investigated the critical fatigue position within the asphalt pavement layer considering the couple effects of strain levels and temperatures. Firstly, field tests were conducted to measure the typical temperature distribution of the asphalt pavement layer. Secondly, laboratory four-point beam fatigue test and dynamic modulus test were applied to evaluate the fatigue life and the dynamic modulus of the asphalt mixture, respectively. Based on the results of field and laboratory tests, the distributions of strain and fatigue damage within the asphalt layer at different temperature conditions were calculated. It was found that the fatigue life of asphalt mixture decreased with the rising strain level but increased with the rising temperature. The critical fatigue position in the flexible pavement changed from 5 to 20 cm when the pavement temperature condition varied from high to medium/low. In terms of the semi-rigid pavement, this position varied between 6 and 12 cm at different temperature conditions. In addition, the fatigue damage within the semi-rigid pavement at high temperature was found to be as noticeable as that at medium/low temperatures. Thus, the fatigue properties of the asphalt layer at higher temperatures need to be carefully evaluated as well.Keywords
Funding Information
- National Natural Science Foundation of China (51678443)
This publication has 13 references indexed in Scilit:
- Temperature predictions for asphalt pavement with thick asphalt layerConstruction and Building Materials, 2018
- Effect of temperature on fatigue tests parameters for conventional and asphalt rubber mixesRoad Materials and Pavement Design, 2016
- Asphalt mix homogeneity2016
- The combined effect of loading frequency, temperature, and stress level on the fatigue life of asphalt paving mixtures using the IDT test configurationInternational Journal of Fatigue, 2014
- Fatigue behavior of SMA and HMA mixturesConstruction and Building Materials, 2010
- Fatigue of bituminous mixturesMaterials and Structures, 2004
- Fatigue Shift Factors to Predict HMA PerformanceInternational Journal of Pavement Engineering, 2003
- Measurement of Vertical Compressive Stress Pulse in Flexible Pavements: Representation for Dynamic Loading TestsTransportation Research Record: Journal of the Transportation Research Board, 2002
- Seasonal Temperature Effects on Flexible Pavements in TennesseeTransportation Research Record: Journal of the Transportation Research Board, 2001
- Field Investigation into Effects of Vehicle Speed and Tire Pressure on Asphalt Concrete Pavement StrainsTransportation Research Record: Journal of the Transportation Research Board, 1996