Low loss and high performance interconnection between standard single-mode fiber and antiresonant hollow-core fiber
Authors:
Open Access
- 22 April 2021
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 11 (1) , 1-9
Abstract
We demonstrate halving the record-low loss of interconnection between a nested antiresonant nodeless type hollow-core fiber (NANF) and standard single-mode fiber (SMF). The achieved interconnection loss of 0.15 dB is only 0.07 dB above the theoretically-expected minimum loss. We also optimized the interconnection in terms of unwanted cross-coupling into the higher-order modes of the NANF. We achieved cross-coupling as low as −35 dB into the LP $$_{11}$$ mode (the lowest-loss higher-order mode and thus the most important to eliminate). With the help of simulations, we show that the measured LP $$_{11}$$ mode coupling is most likely limited by the slightly imperfect symmetry of the manufactured NANF. The coupling cross-talk into the highly-lossy LP $$_{02}$$ mode ( $$>2000$$ dB/km in our fiber) was measured to be below −22 dB. Furthermore, we show experimentally that the anti-reflective coating applied to the interconnect interface reduces the insertion loss by 0.15 dB while simultaneously reducing the back-reflection below −40 dB over a 60 nm bandwidth. Finally, we also demonstrated an alternative mode-field adapter to adapt the mode-field size between SMF and NANF, based on thermally-expanded core fibers. This approach enabled us to achieve an interconnection loss of 0.21 dB and cross-coupling of −35 dB into the LP $$_{11}$$ mode.
Keywords
Funding Information
- České Vysoké Učení Technické v Praze (SGS20/166/OHK3/3T/13)
- Royal Academy of Engineering
- Engineering and Physical Sciences Research Council (EP/P030181/1)
- European Research Council (682724)
This publication has 20 references indexed in Scilit:
- A clock network for geodesy and fundamental scienceNature Communications, 2016
- Attosecond precision multi-kilometer laser-microwave networkLight: Science & Applications, 2016
- Accurate modelling of fabricated hollow-core photonic bandgap fibersOptics Express, 2015
- Transmission of Commercial Low Latency Interfaces Over Hollow-Core FiberJournal of Lightwave Technology, 2015
- Complementary Analysis of Modal Content and Properties in a 19-cell Hollow Core Photonic Band Gap Fiber using Time-of-Flight and S2 Techniques2012
- Miniature fiber-optic high temperature sensor based on a hybrid structured Fabry–Perot interferometerOptics Letters, 2008
- Improved hollow-core photonic crystal fiber design for delivery of nanosecond pulses in laser micromachining applicationsApplied Optics, 2005
- Achieving low loss and low nonlinearity in hollow core photonic crystal fibers2005
- Adhesives in the packaging of planar lightwave circuitsInternational Journal of Adhesion and Adhesives, 2004
- Cleaving optical fibre lengths to high relative accuracyOptics Communications, 1998