Drying Characteristics of Malaysian Paddy: Kinetics & Grain Cracking Quality
- 1 December 2005
- journal article
- research article
- Published by Taylor & Francis in Drying Technology
- Vol. 23 (12) , 2477-2489
Abstract
Drying kinetics of Malaysian paddy dried in a laboratory scale batch rapid bin dryer was studied. Quality of paddy after drying at temperatures of 60 and 80°C, bed heights of 2 and 4 cm, and at different drying stages was presented in terms of cracking percentage. Moisture content of paddy reduced exponentially with time and became stable at equilibrium moisture content. Characteristic drying rate curves exhibited mainly falling rate period, with an induction period in deep beds, but without the constant rate period. A custom-made light box was built to visually analyze the cracking in paddy kernel. The extent of breakage is directly related to the crack percentage. The percentage of cracks increased with drying and tempering temperatures and was higher after 2 weeks of storage before milling. Bed heights did not significantly affect the head rice yield as much as tempering between two drying stages. Temperatures above 80°C caused severe cracking in paddy kernel and produced miserable yield of head rice after milling, which could be slightly improved by tempering. The use of a proper miller is also important in ensuring good head yield results and whiteness quality.Keywords
This publication has 14 references indexed in Scilit:
- A New Variable Diffusion Drying Model for the Second Falling Rate Period of Paddy Dried in a Rapid Bin DryerDrying Technology, 2003
- Rice fissuring response to high drying and tempering temperaturesJournal of Food Engineering, 2003
- AN APPLICATION OF GLASS TRANSITION TEMPERATURE TO EXPLAIN RICE KERNEL FISSURE OCCURRENCE DURING THE DRYING PROCESS*Drying Technology, 2001
- DRYING OF HIGH MOISTURE CONTENT PADDY IN A PILOT SCALE TRIANGULAR SPOUTED BED DRYERDrying Technology, 2001
- EFFECTS OF DRYING ON HEAD RICE YIELD USING FLUIDIZATION TECHNIQUEDrying Technology, 1999
- MANAGING MOIST PADDY BY DRYING, TEMPERING AND AMBIENT AIR VENTILATIONDrying Technology, 1999
- Influence of Drying Conditions on the Processing Quality of Rough RiceDrying Technology, 1997
- PHYSICAL PROPERTIES OF RICE RELATED TO DRYING THE GRAINDrying Technology, 1983
- Post-Drying Fissure Developments in Rough RiceTransactions of the ASAE, 1982
- BREAKAGE OF RICE DURING MILLING — EFFECT OF KERNEL DEFECTS AND GRAIN DIMENSION1Journal of Food Process Engineering, 1979