Shuttle Suppression by Polymer-Sealed Graphene-Coated Polypropylene Separator
- 1 February 2018
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (6) , 5534-5542
Abstract
“Shuttle effect” of lithium polysulfides (LiPS) leads to poor performance and short cycle life of Li-S battery, thus limiting their practical application. We demonstrate here that after coating polypropylene (PP) separator with a continuous monolayer graphene, the “shuttle effect” can be significantly suppressed by limiting the passage of long chain LiPS. The graphene/PP separator can be further modified by sealing the big holes or pores on graphene with in situ polymerized nylon-66, via an interfacial polymerization reaction between diamine and adipoyl chloride supplied by the aqueous and oil phase, respectively from each side of the membrane. With this engineered membrane, an initial specific capacity of 1128.4 mAh g-1 at 0.05 C is achieved after test in a coin cell, higher than that of 983.2 mAh g-1 with pristine PP, along with Coulombic efficiency increased from 96.0% to 99.9% and enhanced cycling durability. Molecular dynamics (MD) simulations attest that the nanopores with appropriate size and structure are effective in acting as a “sieve” to selectively allow only Li+ ions passing through but prevent LiPS from migrating to the anode, consequently alleviating the “shuttle effect”. Our method provides a facile solution towards mitigated “shuttle effect” and eventually contributes to high performance Li-S batteries.Keywords
Funding Information
- Research Grants Council, University Grants Committee (16204815)
- Guangzhou Municipal Science and Technology Program key projects (2016201604030023, 201704030134)
- Innovation and Technology Commission (ITC-CNERC14SC01, ITS/267/15)
- National Natural Science Foundation of China (11472263, 11525211, 11572307)
- Chinese Academy of Sciences (XDB22040402)
- Center for 2D and 1D Quantum Materials, Hong Kong University of Science and Technology
This publication has 42 references indexed in Scilit:
- Encapsulation of sulfur with thin-layered nickel-based hydroxides for long-cyclic lithium–sulfur cellsNature Communications, 2015
- Polydopamine-Coated, Nitrogen-Doped, Hollow Carbon–Sulfur Double-Layered Core–Shell Structure for Improving Lithium–Sulfur BatteriesNano Letters, 2014
- High-Rate, Ultralong Cycle-Life Lithium/Sulfur Batteries Enabled by Nitrogen-Doped GrapheneNano Letters, 2014
- Lithium–Sulfur Batteries: Electrochemistry, Materials, and ProspectsAngewandte Chemie International Edition, 2013
- Lithium/sulfur batteries with high specific energy: old challenges and new opportunitiesNanoscale, 2013
- Li–O2 and Li–S batteries with high energy storageNature Materials, 2011
- Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer CoatingACS Nano, 2011
- Hollow Carbon Nanofiber-Encapsulated Sulfur Cathodes for High Specific Capacity Rechargeable Lithium BatteriesNano Letters, 2011
- A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteriesNature Materials, 2009
- Polysulfide Shuttle Study in the Li/S Battery SystemJournal of the Electrochemical Society, 2004