Sulfur Tolerance and Hydrocarbon Stability of La[sub 0.75]Sr[sub 0.25]Cr[sub 0.5]Mn[sub 0.5]O[sub 3]∕Gd[sub 0.2]Ce[sub 0.8]O[sub 1.9] Composite Anode under Anodic Polarization
- 1 January 2007
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 154 (11) , B1206-B1210
Abstract
A La0.75Sr0.25Cr0.5Mn0.5O3∕Gd0.2Ce0.8O1.9La0.75Sr0.25Cr0.5Mn0.5O3∕Gd0.2Ce0.8O1.9 (LSCM/GDC) composite electrode was developed and applied as a solid oxide fuel cell (SOFC) anode for the direct oxidation of sulfur-containing methane. The anode was fully activated in wet CH4CH4 at 850°C850°C and a constant potential of −0.5V−0.5V with respect to a Pt/air reference before the fuel was shifted to wet 0.5%H2S+99.5%CH40.5%H2S+99.5%CH4 . In the sulfur-containing methane fuel, the anodic current dropped from 0.233Acm−20.233Acm−2 to 0.2Acm−20.2Acm−2 in a 10h10h period, showing a performance degradation rate of ca. 1.4%/hr possibly due to sulfur poisoning. In the subsequent 110h110h period, the anodic current tended to be relatively stable with a very small degradation rate of 0.017%/h, which is most likely attributed to the coarsening of the electrode microstructure. Though some impurities, such as MnSMnS , La2O2SLa2O2S , and α–MnOSα–MnOS , were detected in the X-ray diffraction analysis of the anode after 120h120h of stability test, the scanning electron microscopy micrographs and energy-dispersive X-ray analysis showed that no carbon and sulfur deposition was found on the cross-sectional surface of the anode. The results suggest that the LSCM/GDC composite is a promising candidate material for an anode and has much better hydrocarbon stability and sulfur tolerance under the anodic polarization than Ni-based cermets.Keywords
This publication has 22 references indexed in Scilit:
- Electrical properties and sulfur tolerance of La0.75Sr0.25Cr1−xMnxO3 under anodic conditionsJournal of Solid State Chemistry, 2005
- A Sulfur-Tolerant Anode Material for SOFCsElectrochemical and Solid-State Letters, 2005
- Highly Sulfur Tolerant Cu-Ceria Anodes for SOFCsElectrochemical and Solid-State Letters, 2005
- Improvement of anode performance by surface modification for solid oxide fuel cell running on hydrocarbon fuelJournal of Power Sources, 2004
- A solid oxide fuel cell operating on hydrogen sulfide (H2S) and sulfur-containing fuelsJournal of Power Sources, 2004
- GDC-Based Low-Temperature SOFCs Powered by Hydrocarbon FuelsJournal of the Electrochemical Society, 2004
- Sr-Doped LaCrO[sub 3] Anode for Solid Oxide Fuel CellsJournal of the Electrochemical Society, 2001
- Development of a Low Temperature Operation Solid Oxide Fuel CellJournal of the Electrochemical Society, 2001
- The poisoning effect of sulfur-containing impurity gas on a SOFC anode: Part I. Dependence on temperature, time, and impurity concentrationSolid State Ionics, 2000
- Utilization of Hydrogen Sulfide in an Intermediate‐Temperature Ceria‐Based Solid Oxide Fuel CellJournal of the Electrochemical Society, 1998