Estimation of Vehicle Speed from Pavement Stress Responses Using Wireless Sensors
- 1 September 2021
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Transportation Engineering, Part B: Pavements
- Vol. 147 (3) , 04021028
Abstract
Vehicle speed is a crucial input for mechanistic-based design and maintenance decision making of asphalt pavement. It can be measured using direct methods and indirect methods. Direct methods, such as video camera and inductive loops, have difficultly achieving real-time data processing and have a sophisticated installation process. Indirect methods use the mechanical responses collected by the traditional mechanical sensors to estimate speed. Although effective, these traditional mechanical sensors usually have a low survival rate and require highly sophisticated installation procedures. Recently, a new type of wireless micro-electromechanical sensor (MEMS), SmartRock (Sensor Technology Research Development and Application Laboratory, Hong Kong), has been promising in pavement research to monitor contact stress and acceleration at the particle level. This paper aims to explore the potential and reliability of using the SmartRock in acquiring vehicular speed and to evaluate the effect of loading amplitude and wandering effect (i.e., the loading location relative to the sensor or monitoring-point location) on speed estimation. In this study, SmartRock sensors were embedded in a semirigid pavement, and an accelerated pavement testing (APT) facility was used to apply loadings. Vehicle speed was estimated according to the dynamic stress responses (i.e., stress waves) measured by the SmartRock. In addition, a finite-element model was developed. After being calibrated by SmartRock stress data, this model, combined with SmartRock data, was used to evaluate the effect of load amplitude and wandering on the speed estimation. Findings indicate that SmartRock can reasonably estimate the vehicle speed using both time-domain and frequency-domain methods. The loading amplitude and wandering may have little effect on the speed estimation according to the results of this study, but future work is recommended to verify such findings.Keywords
This publication has 18 references indexed in Scilit:
- Effect of geogrid on railroad ballast particle movementTransportation Geotechnics, 2016
- Field evaluation and analysis of road subgrade dynamic responses under heavy duty vehicleInternational Journal of Pavement Engineering, 2016
- Functionality Enhancement of Industrialized Optical Fiber Sensors and System Developed for Full-Scale Pavement MonitoringSensors, 2014
- HIGHWAY INFRASTRUCTURE HEALTH MONITORING USING MICRO-ELECTROMECHANICAL SENSORS AND SYSTEMS (MEMS)JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT, 2014
- Equivalent Loading Frequencies for Dynamic Analysis of Asphalt PavementsJournal of Materials in Civil Engineering, 2013
- Field evaluation and analysis of flexible pavement structural responses under dynamic loadsRoad Materials and Pavement Design, 2012
- Accuracy of Current Complex Modulus Selection Procedure from Vehicular Load PulseTransportation Research Record: Journal of the Transportation Research Board, 2008
- Preliminary evaluation of MEMS devices for early age concrete property monitoringCement and Concrete Research, 2005
- Measurement of Vertical Compressive Stress Pulse in Flexible Pavements: Representation for Dynamic Loading TestsTransportation Research Record: Journal of the Transportation Research Board, 2002
- Evaluation of the Hall Effect Sensor for Pavement InstrumentationJournal of Testing and Evaluation, 1995