Wetting Transition from the Cassie–Baxter State to the Wenzel State on Regularly Nanostructured Surfaces Induced by an Electric Field
Authors:
- Ben-Xi ZhangBZBen-Xi Zhang
- Shuo-Lin WangSWShuo-Lin Wang
- Xiao-Dong WangXiao-Dong Wang
- 2 January 2019
- journal article
- research article
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 35 (3) , 662-670
Abstract
When droplets are placed on hydrophobic textured surfaces, different wetting state Cassie-Baxter (CB) state or Wenzel (W) state may occur depending on materials and structures of surfaces, types and sizes of droplets, thermal fluctuations, and external stimuli. The wetting transition from the CB to the W state and the opposite process have attracted a great deal of attention due to their primary importance for designing and fabricating textured surfaces. In this work, molecular dynamics (MD) simulations are employed to understand the mechanism behind the CB-to-W transition for a nanoscale water film placed on a surface decorated with a single nanogroove when an external electric field is applied. The free energy variation during the transition process is computed on the basis of the restrained MD simulations. Water intrusion into the groove is observed by simulation snapshots, which provides a direct evidence for the electric-field-induced CB-to-W transition. In the previous experiments, however, only a sharp reduction in the apparent contact angle is employed to judge whether the transition takes place. The free energy curves reveal that there are two energy barriers separating the CB and W states (∆E1) as well as separating the W and CB states (∆E2). Owing to the presence of ∆E1, although the CB state has a higher free energy than the W state, it cannot spontaneously convert to the W state. When the external energy input exceeds ∆E1, the CB-to-W transition can be triggered, otherwise the transition will stop, and the water film will return to the CB state. Moreover, it is found that the maximum of free energy always occurs after the film touches the groove bottom. Thus, the requirement of the film touching the groove bottom is responsible for the presence of the energy barrier ∆E1. Finally, the dependences of the two energy barriers on the electric field strength, groove aspect ratio, and intrinsic contact angle of the groove are also discussed.Keywords
Funding Information
- Ministry of Education of the People's Republic of China (2017ZZD006, JB2018110)
- National Natural Science Foundation of China (51525602, 51821004)
This publication has 50 references indexed in Scilit:
- Electrically Controlled Membranes Exploiting Cassie-Wenzel Wetting TransitionsScientific Reports, 2013
- Water Evaporation: A Transition Path Sampling StudyThe Journal of Physical Chemistry B, 2013
- Fully Reversible Transition from Wenzel to Cassie−Baxter States on Corrugated Superhydrophobic SurfacesLangmuir, 2009
- PLUMED: A portable plugin for free-energy calculations with molecular dynamicsComputer Physics Communications, 2009
- Coexistence and transition between Cassie and Wenzel state on pillared hydrophobic surfaceProceedings of the National Academy of Sciences, 2009
- Extreme Resistance of Superhydrophobic Surfaces to Impalement: Reversible Electrowetting Related to the Impacting/Bouncing Drop TestLangmuir, 2008
- Electrowetting-Based Control of Droplet Transition and Morphology on Artificially Microstructured SurfacesLangmuir, 2008
- Nanonails: A Simple Geometrical Approach to Electrically Tunable Superlyophobic SurfacesLangmuir, 2007
- Vibration-induced Cassie-Wenzel wetting transition on rough surfacesApplied Physics Letters, 2007
- Reversible Electrowetting on Superhydrophobic Silicon NanowiresNano Letters, 2007