An In-Plane Bending Test to Characterize Edge Ductility in High-Strength Steels
Open Access
- 22 August 2022
- journal article
- research article
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 32 (4) , 1892-1904
Abstract
A novel in-plane bending test was used to study edge ductility in DP800 as a common advanced high-strength steel in the car industry. The test utilized the digital image correlation technique to measure the local and average fracture strain values along the edge of the specimen. In contrast to the widely used hole expansion capacity test, the impact of punch friction, contact stress, and out-of-plane strain on edge ductility is eliminated by removing the punch. Also, the strain gradient inherent to the beam bending provides a controlled crack propagation path, making crack tracking easier than the sheared edge tensile test. The proposed bending test was utilized to investigate the influence of material orientation, cutting parameters, and global strain gradient on edge fracture strain. A correlation was observed between edge ductility, material orientation, and cutting tool sharpness, while the average fracture strain was independent of the strain gradient. The outcome shows that the in-plane bending test is reliable for determining edge ductility in any desired material orientation.Keywords
This publication has 30 references indexed in Scilit:
- Assessment of the Critical Parameters Influencing the Edge Stretchability of Advanced High-Strength Steel SheetJournal of Materials Engineering and Performance, 2016
- EXPERIMENTAL INVESTIGATION OF THE HOLE EXPANSION CAPABILITY OF A MARTENSITIC AHSS STEEL WITH TWO PUNCH GEOMETRIES AND A VARIETY OF HOLE DIAMETERSInternational Journal of Materials Engineering and Technology, 2016
- Development of new hole expansion testing methodJournal of Physics: Conference Series, 2016
- Synergy effect of shear angle and anisotropic material ductility on hole-expansion ratio of high-strength steelsJournal of Materials Processing Technology, 2016
- Influence of curvature variation on edge stretchability in hole expansion and stretch flanging of advanced high-strength steelThe International Journal of Advanced Manufacturing Technology, 2016
- Ncorr: Open-Source 2D Digital Image Correlation Matlab SoftwareExperimental Mechanics, 2015
- A new method for predicting Forming Limit Curves from mechanical propertiesJournal of Materials Processing Technology, 2013
- An Innovative Shearing Process for AHSS Edge Stretchability ImprovementsJournal of Manufacturing Science and Engineering, 2011
- Review of the Shearing Process for Sheet Steels and Its Effect on Sheared-Edge StretchingJournal of Materials Engineering and Performance, 2011
- Estimation of hole-flange ability for deep drawing steel sheetsArchives of Civil and Mechanical Engineering, 2008