Evaluation and Structural Optimisation of 0.6 m Impulse Turbine in Dolphin Wave Energy Conversion Device Through Computational Fluid Dynamics and Generative Design
Open Access
- 9 December 2024
- journal article
- research article
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (12) , 2259
Abstract
In this paper, the performance of an adapted design of a 0.6 m impulse turbine in a new wave energy conversion device—the Dolphin device—is evaluated. This study is focused on developing an optimised structure in order to maximise the potential of the device and provide a lightweight and robust novel design. For this purpose, initial studies on the system involved 2D CFD simulations combined with parametric optimisation, which validated the use of the turbine system with water as the working fluid. The obtained component geometries were then used for the creation of a 3D CFD model, which was tested in a set-up dynamic simulation environment. Subsequently, the performance of the system was evaluated through the use of referenced experimental analyses. By taking into account the loading conditions present at the blades, as well as the inherent typical loads caused by the rotational speed of the turbine, the system was then optimised using generative design processes. Through the applied methodology, the performance of the turbine was predicted to be 61.79%. Moreover, the generative design optimisation showed a reduction in mass of 60.226% for the blade structure and 69.523% for the rotor structure.Keywords
Funding Information
- Energy Technology Partnership [ETP] in collaboration with Edinburgh Napier University and Pentland Materials Supply Ltd. (ETP PhD #227)
This publication has 21 references indexed in Scilit:
- Evaluating the cost competitiveness of metal additive manufacturing – A case study with metal material extrusionCIRP Journal of Manufacturing Science and Technology, 2023
- Powder bed fusion–laser melting (PBF–LM) process: latest review of materials, process parameter optimization, application, and up-to-date innovative technologiesProgress in Additive Manufacturing, 2022
- Energy and material efficiency strategies enabled by metal additive manufacturing – A review for the aeronautic and aerospace sectorsEnergy Reports, 2022
- Metal additive manufacturing in aerospace: A reviewMaterials & Design, 2021
- A review of topology optimization for additive manufacturing: Status and challengesChinese Journal of Aeronautics, 2021
- Effects of fixed and dynamic mesh methods on simulation of stepped planing craftJournal of Ocean Engineering and Science, 2019
- Will oscillating wave surge converters survive tsunamis?Theoretical and Applied Mechanics Letters, 2015
- 3DCAD conceptual design of the next-generation impulse turbine using the Pugh decision-matrixMaterials & Design (1980-2015), 2009
- Prototype testing of the wave energy converter wave dragonRenewable Energy, 2006
- Experimental and computational analysis on guide vane losses of impulse turbine for wave energy conversionRenewable Energy, 2005