Mechanism and Energy Evolution Characteristics of Coal Burst in Mining Thick, Deep, and Large Inclined Coal Seams: A Case Study from a Chinese Coal Mine
Open Access
Abstract
Coal burst is a severe and dynamic hazard, and understanding its mechanism is crucial in preventing such incidents. Strong tremors during the working face mining in the stress anomaly zone of the pinch-out coal seam are frequent. Theoretical analysis, numerical simulation, and field measurement methods are used to analyze the energy evolution law for mining at the working face and mechanism of coal burst. Mechanical models of the inclined and strike overhang structures are established, and the theoretical analysis of the strike and inclined energy distribution characteristics of the working face roof is carried out. The two key areas with a high overhang bending deformation energy accumulation are identified at the lower end and middle-upper part of the working face. The simulation results show that the energy accumulation area of the roof in the inclined coal seam has prominent asymmetric distribution characteristics. The roof energy accumulates in the lower end and middle-upper area of the working face. The floor energy accumulates in the lower end area of the working face, and the peak position of the overhead energy of the working face in the direction shifts toward the coal-wall side. Influenced by the local absence of the No. 8 coal seam, the vertical stress of the surrounding rock at the working face of the massive, inclined coal seam increased by 12.7%; the peak of roof energy at the working face inclination and strike increased by 46.2% and 32.2%; and the range of roof energy accumulation expanded. A deep directional hole blasting plan to prevent the phenomenon at the working face roof is developed, which effectively reduces the stress and energy level of the inclined hanging roof and avoids the occurrence of coal bursts in the abnormal stress area of the working face.Keywords
Funding Information
- Major scientific and technological innovation projects in Shandong Province (2019SDZY02, KYCX21_2331, KYCX21_2380, 51674253, 51734009)
- Postgraduate Research and Practice Innovation Program of Jiangsu Province (2019SDZY02, KYCX21_2331, KYCX21_2380, 51674253, 51734009)
- National Natural Science Foundation of China (2019SDZY02, KYCX21_2331, KYCX21_2380, 51674253, 51734009)
This publication has 28 references indexed in Scilit:
- Research on Stability of Overburden Structure around Longwall Mining Face in Steeply Dipping Seam GroupApplied Mechanics and Materials, 2015
- Analysis of rockburst mechanisms induced by structural planes in deep tunnelsBulletin of Engineering Geology and the Environment, 2014
- Research progress of monitoring, forecasting, and prevention of rockburst in underground coal mining in ChinaInternational Journal of Coal Science & Technology, 2014
- Long-hole destress blasting for rockburst control during deep underground coal miningInternational Journal of Rock Mechanics and Mining Sciences, 2013
- Rockburst hazard determination by using computed tomography technology in deep workfaceSafety Science, 2012
- Rock burst induced by roof breakage and its preventionJournal of Central South University, 2012
- Influence of the stress state in a coal bump-prone deep coalbed: A case studyInternational Journal of Rock Mechanics and Mining Sciences, 2009
- Rockbursts and the instability of rock massesInternational Journal of Rock Mechanics and Mining Sciences, 1996
- Analysis of elastic-plastic problems based on the principle of superposition: I. Basic theoryInternational Journal of Plasticity, 1992
- A study of brittle rock fracture in laboratory compression experimentsInternational Journal of Rock Mechanics and Mining Sciences, 1970