Optimization Effect of Metakaolin on Macro- and Micro-Mechanical Properties of Composite Cementitious Materials under Different Curing Conditions
Open Access
- 26 November 2022
- Vol. 15 (23) , 8435
Abstract
To provide the theoretical basis for the engineering application of metakaolin as aluminum-rich pozzolanic ash materials, the promoting effect of metakaolin on the macro- and micro-mechanical properties of composite cement-based composite materials was explored under high-temperature steam and standard curing conditions. Analysis techniques, which involved thermogravimetric and nanoindentation coupled with scanning electron microscopy–energy dispersive X-ray spectroscopy, were used. To analyze the experimental data, the ACI empirical formula and the copula function were used. The correlation among the hydration degree of the MK-cement cementation system, the Al/Si of the C-(A)-S-H phase, and the nanomechanical properties of the C-(A)-S-H gel phase was investigated. According to prior research, the macroscopic mechanical properties and the substitution rate of the MK-cement composite cementitious system can be improved under high-temperature curing conditions in a short period, in which the optimum substitution rate of metakaolin is 20%. The ACI empirical formula was used to demonstrate the functional relationship between the metakaolin replacement rate, curing time, and compressive strength. The MK-cement cementation system can eliminate the defect phase, reduce the CH phase content, and then increase the C-(A)-S-H gel phase content and bulk density. The micro-mechanical properties of the C-(A)-S-H gel phase rises due to its phase content and Al/Si ratio. Furthermore, the copula function verifies the dependence of the nanomechanical properties of C-(A)-S-H gel and Al/Si.Keywords
Funding Information
- National Natural Science Foundation of China (11762014)
This publication has 32 references indexed in Scilit:
- A Coupled Nanoindentation/SEM‐EDS Study on Low Water/Cement Ratio Portland Cement Paste: Evidence for C–S–H/Ca(OH)2 NanocompositesJournal of the American Ceramic Society, 2010
- The nanogranular nature of C–S–HJournal of the Mechanics and Physics of Solids, 2007
- A colloidal interpretation of chemical aging of the C-S-H gel and its effects on the properties of cement pasteCement and Concrete Research, 2006
- Alkali sorption by C-S-H and C-A-S-H gelsCement and Concrete Research, 2002
- An Introduction to CopulasTechnometrics, 2000
- A model for the microstructure of calcium silicate hydrate in cement pasteCement and Concrete Research, 2000
- Characteristics of a thermally activated alumino-silicate pozzolanic material and its use in concreteCement and Concrete Research, 1995
- The incorporation of minor and trace elements into calcium silicate hydrate (CSH) gel in hardened cement pastesCement and Concrete Research, 1993
- The chemistry of the pore fluid of silica fume-blended cement systemsCement and Concrete Research, 1990
- Identification of hydrated cement constituents using a scanning electron microscope energy dispersive X-ray spectrometer combinationCement and Concrete Research, 1972