The article discusses the use of the iNav autopilot as part of a mission simulator for training crews of aircraft-type unmanned aerial vehicles. The subject of the study is the construction of a closed simulation loop in which the autopilot logic works together with a flight dynamics model, virtual sensors, control channels and training scenarios. The aim of the work is to describe the architecture and methodology for integrating iNav in SITL mode for use in a UAV crew simulator. To achieve this goal, the main tasks are defined: to analyze the place of iNav among approaches to autopilot simulation, to describe the order of component launch, to determine the composition of data transmitted between the simulation module, JSBSim and iNav, to consider the role of the MSP and X-Plane UDP protocols, and to form an approach to modeling weather effects, failures and distortions. The research methodology is based on the system modeling of UAV operation in a training environment. JSBSim is used as a source of a dynamic flight model, and the simulation module performs the transformation of coordinates, velocities, angles, accelerations, altitude, airspeed and other parameters into a form suitable for processing by the autopilot. Radio control commands, telemetry, and diagnostic states are transmitted via MSP, and a high-frequency circuit for exchanging sensor values and control outputs is formed via X-Plane UDP. The possibility of transitioning from SITL to HITL, when a physical controller is used instead of a software process, is separately considered. The main results are a generalized architecture of iNav integration with JSBSim, a description of the startup sequence, definition of a set of virtual sensors and output commands, as well as formalization of scenarios of GPS loss, navigation data substitution, electronic jamming, control channel loss, IMU noise, barometer drift, Pitot tube failure, servo saturation, and battery voltage sag. It is concluded that iNav can be effectively used in a fixed-wing UAV simulator provided the simulation bridge is correctly constructed. The practical significance of the work lies in the possibility of creating a safe, repeatable and controllable environment for training crews and practicing actions in normal and abnormal conditions.