Narrow gap laser welding for potential nuclear pressure vessel manufacture
Authors:
- 31 March 2016
- journal article
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 28 (2) , 022421
Abstract
High power density electron beam and laser beam welding show their unique advantages in the welding of thick-section steels for potential nuclear pressure vessel manufacture. Compared with traditional submerged arc welding or newly developed narrow-gap submerged arc welding, electron beam welding and laser beam welding techniques offer high welding speeds, low heat inputs, lower levels of residual stresses and distortion, while consuming less filler material and power. As a part of the new nuclear manufacturing EPSRC Program, this study aimed to develop narrow gap laser welding procedures and parameters for joining 30–130 mm thick ferritic steels for potential application to pressure vessel manufacture in civil nuclear power plants. The results showed that high quality welded joints in 30 mm thick steels had been achieved with a combination of an autogenous root pass and multipass narrow gap (4–5 mm parallel grooves) welding with a defocused laser beam welding and filler wire addition, at laser powers of 7.5–8 kW, a welding velocity of 0.4 m/min, a diameter of the laser spot of 6 mm, and wire feed rates of 4–6 m/min. The results also showed that cracking, lack of sidewall fusion, and porosity were the main defects in multiple pass narrow gap laser welds in thick-section ferritic steels if the welding parameters were not optimized. The microhardness of the multipass weld was lower than that of the autogenous weld as tempered martensite was achieved in multipass welding.Keywords
This publication has 14 references indexed in Scilit:
- Microstructure and mechanical characteristics of a laser welded joint in SA508 nuclear pressure vessel steelMaterials Science and Engineering: A, 2015
- Development of Residual Stress Profiles for Defect Tolerance Assessments of Thick Section Electron Beam Welds2014
- Multi-pass laser welding of thick plate with filler wire by using a narrow gap joint configurationJournal of Mechanical Science and Technology, 2013
- Understanding the process parameter interactions in multiple-pass ultra-narrow-gap laser welding of thick-section stainless steelsThe International Journal of Advanced Manufacturing Technology, 2013
- Research on Manufacture and Enclosure Welding of ITER Correction Coils CasesIEEE Transactions on Applied Superconductivity, 2011
- Towards advanced welding methods for the ITER vacuum vessel sectorsFusion Engineering and Design, 2003
- High power Nd:YAG laser welding in manufacturing of vacuum vessel of fusion reactorFusion Engineering and Design, 2003
- Characterization of gradients in mechanical properties of SA-533B steel welds using ball indentationInternational Journal of Pressure Vessels and Piping, 1999
- Investigation on the possibility of using the microshear test as a surveillance method to estimate the mechanical properties and fracture toughness of nuclear pressure vessel steel, A508CL3, and its joints welded by narrow-gap submerged-arc weldingInternational Journal of Pressure Vessels and Piping, 1999
- Comparative studies of stress-relief cracking in relaxation test specimens and in a full-scale weldmentInternational Journal of Pressure Vessels and Piping, 1984