CR composites with improved processing safety crosslinked via Heck's reaction
- 17 September 2020
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (9)
Abstract
The aim of this study was to optimize the composition of the chloroprene rubber (CR) composites crosslinked via the Heck‐type reaction to ensure their safe processing at elevated temperature. The developed curing system consisting of iron (III) acetylacetonate (Fe(acac)) and triethanolamine (TEOA) demonstrates high activity and more eco‐friendly composition in comparison with metal oxide system, commercially used for CR crosslinking. However, the high activity of Fe(acac)/TEOA system results in a short scorch time, which is the greatest disadvantage regarding the safe processing of CR rubber and thus, must be improved. Therefore, CR compounds with Fe(acac) in the presence of different additives were studied. The longest scorch times (t02) were observed for rubber compounds with urotropine (U), N‐cyclohexyl‐2‐benzothiazole sulfenamide (CBS) or salicylic acid. Moreover, vulcanizates containing these additives exhibited higher tensile strengths and elongation at breaks compared to CR crosslinked with Fe(acac)/TEOA system.Keywords
Funding Information
- Wydział Chemiczny, Politechnika Łódzka (W‐3D/FMN/34G/2016)
This publication has 24 references indexed in Scilit:
- Thermal analysis of halogenated rubber cured with a new cross-linking systemJournal of Thermal Analysis and Calorimetry, 2019
- Thermal analysis applied to studying the influence of ionic liquids on the vulcanization, thermal stability and damping properties of ethylene-propylene-diene rubberJournal of Thermal Analysis and Calorimetry, 2019
- METAL COMPLEXES AS NEW PRO-ECOLOGICAL CROSSLINKING AGENTS FOR CHLOROPRENE RUBBER BASED ON HECK COUPLING REACTIONRubber Chemistry and Technology, 2019
- Thermal analysis and mechanical methods applied to studying properties of SBR compounds containing ionic liquidsPolymer Testing, 2017
- MECHANISM FOR CROSS-LINKING POLYCHLOROPRENE WITH ETHYLENE THIOUREA AND ZINC OXIDERubber Chemistry and Technology, 2015
- Compounding and Vulcanization2013
- MgO and ZnO as reinforcing fillers in cured polychloroprene rubberJournal of Applied Polymer Science, 2012
- Plastic materials: chlorinated polyethylene (CPE), chlorinated polyvinylchloride (CPVC), chlorosulfonated polyethylene (CSPE) and polychloroprene rubber (CR)2012
- Vulcanization2005
- Vulcanization and crosslinking in elastomersProgress in Polymer Science, 1997