A Simple Control Scheme to Avoid the Sensing Noise for the DC–DC Buck Converter With Synchronous Rectifier
Authors:
- 13 November 2017
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 65 (6) , 5086-5091
Abstract
The common method of improving efficiency when a synchronous buck converter operates at a light load is to adopt a current sensor to generate a turn-off command for the synchronous rectifying switch (SRS). However, a current-sensing technique with passive components is easily affected by noise and ringing, causing abnormal switching of the SRS. This study presents a simple control scheme for determining the zero point of an inductor current. It utilizes ripple voltage generated by a charging/discharging behavior from the capacitor to emulate the inductor current without using current sensors. The control strategy is verified by developing a 25-W synchronous rectifier buck converter.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 105-2221-E-150-047)
This publication has 14 references indexed in Scilit:
- Sensorless control scheme for synchronous buck converterIET Circuits, Devices & Systems, 2016
- Zero voltage switching interleaved coupled inductor synchronous buck converter operating at boundary conditionIET Power Electronics, 2016
- A Peak-Capacitor-Current Pulse-Train-Controlled Buck Converter With Fast Transient Response and a Wide Load RangeIEEE Transactions on Industrial Electronics, 2015
- Switching Frequency Stabilization Techniques for Adaptive On-Time Controlled Buck Converter With Adaptive Voltage Positioning MechanismIEEE Transactions on Power Electronics, 2015
- Design of a Single-Switch DC/DC Converter for a PV-Battery-Powered Pump System With PFM+PWM ControlIEEE Transactions on Industrial Electronics, 2014
- Limiting Integral Loop Digital Control for DC–DC Converters Subject to Changes in Load Current and Source VoltageIEEE Transactions on Industrial Informatics, 2014
- Digital Current Sharing Method for Parallel Interleaved DC–DC Converters Using Input Ripple VoltageIEEE Transactions on Industrial Informatics, 2012
- A Fast Transient Recovery Module for DC–DC ConvertersIEEE Transactions on Industrial Electronics, 2009
- Improved light-load efficiency for synchronous rectifier voltage regulator moduleIEEE Transactions on Power Electronics, 2000
- Controlling a DC-DC converter by using the power MOSFET as a voltage controlled resistorIEEE Transactions on Circuits and Systems I: Regular Papers, 2000