The Analysis of the Compositional Uniformity of a Ti-Al Alloy during Electron Beam Cold Hearth Melting: A Numerical Study
Open Access
Abstract
The electron beam cold hearth melting (EBCHM) process is one of the key processes for titanium alloy production. However, EBCHM is prone to cause elemental volatilization and segregation during the melting of aluminum-containing titanium alloys such as Ti-6wt%Al-4wt%V. To gain deeper insights into the physical and chemical phenomena occurring during the EBCHM process, this paper establishes melting process models for the Ti-6wt%Al-4wt%V titanium alloy in a crystallizer with multiple overflow inlets. It examines the evolution of melt pool morphology, flow dynamics, heat transfer, and mass transfer during the casting process. The results indicate that the design of multi-overflow inlets can effectively suppress the longitudinal development of impact pits within the melt pool, thereby preventing the formation of solidification defects such as leaks in the melt. Concurrently, the diversion effect of multi-overflow inlets significantly enhances the elemental homogeneity within the melt pool. At a casting speed of 20 mm/min and a casting temperature of 2273 K, compared to a single overflow inlet, the design with three overflow inlets can reduce the depth of thermal impact pits within the crystallizer by 132 mm and decrease the maximum concentration difference in the Al element within the crystallizer by 0.933 wt.%. The aforementioned simulation results provide a theoretical basis for the control of metallurgical and solidification defects in large-scale titanium alloy ingots.Keywords
Funding Information
- National Natural Science Foundation of China (52104351, 202202AG050007, 202301AT070795, 202101AU070088)
- Technology Major Project of Yunnan Province (52104351, 202202AG050007, 202301AT070795, 202101AU070088)
- Yunnan Fundamental Research Projects (52104351, 202202AG050007, 202301AT070795, 202101AU070088)
This publication has 36 references indexed in Scilit:
- Influence of Annealing Treatment on α Phase Globularization, Mechanical Properties, and Corrosion Performance of Hot-Rolled Ti–0.3Mo–0.8Ni Alloy Melted by Electron Beam Cold Hearth TechnologyMetallurgical and Materials Transactions A, 2023
- Numerical Simulation of Inclusion Distribution in Vacuum Arc Remelting IngotMetallurgical and Materials Transactions B, 2023
- Current situation and development trend of titanium metal industry in ChinaInternational Journal of Minerals, Metallurgy and Materials, 2022
- Microwave-assisted preparation of nanocluster rutile TiO2 from titanium slag by NaOH-KOH mixture activationAdvanced Powder Technology, 2022
- Modeling of process and analysis of drying characteristics for natural TiO2 under microwave heatingChemical Engineering and Processing - Process Intensification, 2022
- Inclusions in melting process of titanium and titanium alloysChina Foundry, 2019
- Numerical Modeling of EBCHM for Large-Scale TC4 Alloy Round IngotsJOM, 2018
- Mechanical Behavior of a Low-Cost Ti–6Al–4V AlloyJournal of Dynamic Behavior of Materials, 2018
- A three-dimensional steady state thermal fluid model of jumbo ingot casting during electron beam re-melting of Ti–6Al–4VApplied Mathematical Modelling, 2014
- Evaluation of evaporation losses during electron-beam melting of Ti-Al-V alloysMetallurgical and Materials Transactions B, 2003