A semi-permanent method for fixing sand beds in laboratory flumes
- 11 June 2010
- journal article
- research article
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 48 (3) , 377-382
Abstract
A new flume bed-sediment hardening method employing a surficial layer of plaster of Paris coated by spar urethane has been developed and tested for sand beds. Unlike existing bed-hardening techniques, this method is gentle enough to be used in and subsequently removed from a laboratory flume made of Plexiglas, yet is durable enough to last several days under flowing water. Tests showed that artificially fixed beds withstand an estimated bed shear stress of up to 0.251 N/m2 for 52 h. The effects of the hardening technique on bed roughness were evaluated. A mean absolute difference in the bed roughness estimate between fixed and loose beds of 0.166 mm was found when tested on a sand bed. Although roughness estimates seemed reasonable, standard deviations were high. Further testing under a wider range of flow conditions and sediment sizes is required to assess the effect of the hardening technique on roughness.Keywords
This publication has 10 references indexed in Scilit:
- Laboratory measurements of 3-D flow patterns and turbulence in straight open channel with rough bedJournal of Hydraulic Research, 2008
- Sedimentation Engineering2008
- Stabilising the sediment bed in laboratory flumesJournal of Hydraulic Research, 2001
- Flow Turbulence over Fixed and Weakly Mobile Gravel BedsJournal of Hydraulic Engineering, 2000
- Estimating Bottom Stress in Tidal Boundary Layer from Acoustic Doppler Velocimeter DataJournal of Hydraulic Engineering, 2000
- Sediment transport and bed morphology at river channel confluencesSedimentology, 1988
- On preserving the sand patterns in river modelsJournal of Hydraulic Research, 1972
- Bed Topography Effect on Flow in a MeanderJournal of the Hydraulics Division, 1970
- Resistance Properties of Sediment-Laden StreamsJournal of the Hydraulics Division, 1959
- The movement of desert sandProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1936