Glucose determination using amperometric non-enzymatic sensor based on electroactive poly(caffeic acid)@MWCNT decorated with CuO nanoparticles
- 26 March 2022
- journal article
- research article
- Published by Springer Nature in Microchimica Acta
- Vol. 189 (4) , 1-14
Abstract
A novel non-enzymatic glucose sensor based on poly(caffeic acid)@multi-walled carbon nanotubes decorated with CuO nanoparticles (PCA@MWCNT-CuO) was developed. The described approach involves the complexation/accumulation of Cu(II) on PCA@MWCNT followed by electrochemical CuO deposition in an alkaline electrolyte. The morphology and surface characteristics of the nanomaterial were determined by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), atomic force microscopy (AFM), Raman spectroscopy, and inductively coupled plasma mass spectrometry (ICP-MS). A hybrid-support sensor device was then developed to assess the glucose concentration in different solutions. The sensitivity of the electrode is 2412 μA mM−1 cm−2. The electrode exhibited a broad linear range of 2 µM to 9 mM and a low limit of detection (LOD) of 0.43 µM (relative standard deviation, RSD = 2.3%) at + 0.45 V vs Ag/AgCl. The excellent properties obtained for glucose detection were most likely due to the synergistic effect of the combination of individual components: poly(caffeic acid), MWCNTs, and CuO. Good accuracy and high precision were demonstrated for quantifying glucose concentrations in human serum and blood samples (the recovery ranged from 95.0 to 99.5%). The GC/PCA@MWCNT-CuO sensor represents a novel, simple, and low-cost approach to the fabrication of devices for amperometric sensing of glucose. Graphical abstractKeywords
Funding Information
- Narodowym Centrum Nauki (2017/27/B/ST8/01506)
This publication has 31 references indexed in Scilit:
- Novel ultrasensitive non-enzymatic glucose sensors based on controlled flower-like CuO hierarchical filmsSensors and Actuators B: Chemical, 2014
- Flexible CuO Nanosheets/Reduced-Graphene Oxide Composite Paper: Binder-Free Anode for High-Performance Lithium-Ion BatteriesACS Applied Materials & Interfaces, 2013
- A highly sensitive nonenzymatic glucose sensor based on multi-walled carbon nanotubes decorated with nickel and copper nanoparticlesElectrochimica Acta, 2013
- Copper oxide nanoleaves decorated multi-walled carbon nanotube as platform for glucose sensingAnalytical Methods, 2012
- Seed-mediated synthesis of copper nanoparticles on carbon nanotubes and their application in nonenzymatic glucose biosensorsAnalytica Chimica Acta, 2012
- Highly sensitive nonenzymatic glucose sensor based on electrospun copper oxide-doped nickel oxide composite microfibersTalanta, 2011
- A highly sensitive non-enzymatic glucose sensor based on a simple two-step electrodeposition of cupric oxide (CuO) nanoparticles onto multi-walled carbon nanotube arraysTalanta, 2010
- Preparation of nano-copper oxide modified glassy carbon electrode by a novel film plating/potential cycling method and its characterizationSensors and Actuators B: Chemical, 2009
- A sensitive nonenzymatic glucose sensor in alkaline media with a copper nanocluster/multiwall carbon nanotube-modified glassy carbon electrodeAnalytical Biochemistry, 2007
- Double resonance Raman spectroscopy of single-wall carbon nanotubesNew Journal of Physics, 2003