Tantalum carbide-graphite composite film synthesized by hot-filament chemical vapor deposition
- 31 March 2012
- journal article
- Published by Walter de Gruyter GmbH in Pure and Applied Chemistry
- Vol. 84 (12) , 2499-2506
Abstract
A composite film of tantalum carbide (TaC)-graphite was synthesized on etched Si using thermal evaporation of Ta followed by C/H chemical vapor deposition (CVD). In the present study, Ta wire 0.5 mm in diameter was electrically heated without carburizing. Under high current conditions, filaments were thermally evaporated and interacted with chemically decomposed C, forming a composite film of TaC-graphite deposits on the substrates. The influence of chamber pressure, substrate temperature, and methane concentration on the film properties has been studied. By increasing chamber pressure from 25 to 100 torr in a gas mixture of H and methane (containing 3 % methane), the morphology of films changed with an increased growth rate and surface roughness. Increasing the methane concentration in the mixture resulted in broadening of X-ray diffraction (XRD) peaks, increase in film thickness, and coarsening of grains, along with formation of clusters. The growth rates of the films produced at a substrate temperature of 950 °C were lower than those deposited at 850 °C. Their grain sizes were bigger and exhibited a dense structure with higher surface roughness.Keywords
This publication has 14 references indexed in Scilit:
- Tantalum carbide films synthesized by hot-filament chemical vapor deposition techniqueSurface and Coatings Technology, 2012
- Surface morphology, growth rate and quality of diamond films synthesized in hot filament CVD system under various methane concentrationsApplied Surface Science, 2011
- Phase composition and morphology of TaC coating on carbon fibers by chemical vapor infiltrationThin Solid Films, 2008
- A study on the flexibility of the hot-filament configuration and its implementation for diamond, boron carbide and ternary alloys depositionSurface and Coatings Technology, 2006
- TiC and TaC deposition by pulsed laser ablation: a comparative approachApplied Surface Science, 2001
- Preparation, structure and properties of TaN and TaC films obtained by ion beam assisted depositionNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1997
- Comparison of the oxidation behaviour of two dense hot isostatically pressed tantalum carbide (TaC and Ta2C) MaterialsJournal of the European Ceramic Society, 1997
- TaC coatings prepared by hot filament chemical vapour deposition: characterization and propertiesThin Solid Films, 1994
- Deposition and Modification of Tantalum Carbide Coatings on Graphite by Laser InteractionsMRS Proceedings, 1992
- The crystal structures of V2C and Ta2CActa Crystallographica, 1965