Preparation and Electrochemical Properties of Li1+xAlxGe2-x(PO4)3Synthesized by a Sol-Gel Method
Authors:
- 1 January 2012
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 159 (7) , A1114-A1119
Abstract
NASICON-type Li1+xAlxGe2-x(PO4)3 solid state lithium ionic conductors were synthesized by a sol-gel method using citric acid and ethylene glycol. The obtained precursors were sintered at various temperatures and the NASICON-type single phase was observed in a range of x = 0–0.6. The highest electrical conductivity was obtained for Li1.4Al0.4Ge1.6(PO4)3 sintered at 900°C for 11 h in air. The total conductivity was 1.22×10−3 S cm−1 at 25°C, and the bulk and grain boundary conductivities were estimated by impedance profile analysis to be 1.70×10−3 and 4.30×10−3 S cm−1, respectively. Sintered pellets of Li1.4Al0.4Ge1.6(PO4)3 were immersed in distilled water, saturated LiCl aqueous solution, and a saturated LiCl and LiOH aqueous solution at 50°C for one week; X-ray diffraction patterns of these samples dried at 220°C under vacuum showed no significant change from that of the pristine sample. The electrical conductivity of Li1.4Al0.4Ge1.6(PO4)3 was decreased to 1.4×10−4 S cm−1 at 25°C by immersion in distilled water, while immersion in the saturated LiCl aqueous solution increased the conductivity to 4.95×10−3 S cm−1 at 25°C. Li1.4Al0.4Ge1.6(PO4)3 was stable in the saturated LiCl and LiOH aqueous solution. Li1.4Al0.4Ge1.6(PO4)3 was unstable in contact with Li metal and Li-In alloy, but was stable in contact with Li7Ti5O12.Keywords
This publication has 24 references indexed in Scilit:
- Correlation between micro-structural properties and ionic conductivity of Li1.5Al0.5Ge1.5(PO4)3 ceramicsJournal of Power Sources, 2011
- A study on lithium/air secondary batteries—Stability of the NASICON-type lithium ion conducting solid electrolyte in alkaline aqueous solutionsJournal of Power Sources, 2011
- H+/Li+ exchange property of Li3XLa2/3−XTiO3 in water and in humid atmosphereSolid State Ionics, 2011
- Stability of a Water-Stable Lithium Metal Anode for a Lithium–Air Battery with Acetic Acid–Water SolutionsJournal of the Electrochemical Society, 2010
- Space-Charge-Mediated Superionic Transport in Lithium Ion Conducting Glass–CeramicsJournal of the Electrochemical Society, 2009
- Building better batteriesNature, 2008
- Superionic Conductivity in a Lithium Aluminum Germanium Phosphate Glass–CeramicJournal of the Electrochemical Society, 2008
- Water Durable Lithium Ion Conducting Composite Membranes from the Li[sub 2]O-Al[sub 2]O[sub 3]-TiO[sub 2]-P[sub 2]O[sub 5] Glass-CeramicJournal of the Electrochemical Society, 2007
- Recent progress of glass and glass-ceramics as solid electrolytes for lithium secondary batteriesSolid State Ionics, 2006
- Lithium conducting glass ceramic with Nasicon structureMaterials Research Bulletin, 2002