The effect of cutting parameters and cutting tools on machining performance of carbon graphite material
Authors:
- 2 January 2020
- journal article
- research article
- Published by Taylor & Francis in Machining Science and Technology
- Vol. 24 (1) , 96-111
Abstract
The present study focuses on the effects of cutting speed, feed rate and cutting tool material on the machining performance of carbon graphite material. Polycrystalline Diamond (PCD) cutting tools are used in machining experiments and its performance is compared with the tungsten carbide (WC) and Cubic Boron Nitride (CBN) tools. Machining performance criteria such as flank and nose wear and resulting surface topography and roughness of machined parts were studied. This study illustrates that feed rate and cutting tool material play a dominant role in the progressive wear of the cutting tool. The highest feed rate and cutting speed profoundly reduce the tool wear progression. The surface roughness and topography of specimens are remarkably influenced from the tool wear. Major differences are found in the wear mechanisms of PCD and WC and CBN cutting tools.Keywords
This publication has 16 references indexed in Scilit:
- Effect of Boron-Doped Diamond Interlayer on Cutting Performance of Diamond Coated Micro Drills for Graphite MachiningMaterials, 2013
- Tool wear, chip formation and workpiece surface issues in CBN hard turning: A reviewInternational Journal of Precision Engineering and Manufacturing, 2010
- Micro- and nano-crystalline CVD diamond coated tools in the turning of EDM graphiteSurface and Coatings Technology, 2008
- A study of diamond film deposition on WC–Co inserts for graphite machining: Effectiveness of SiC interlayers prepared by HFCVDDiamond and Related Materials, 2008
- Impact of surface roughness of diamond coatings on the cutting performance when dry machining of graphiteInternational Journal of Manufacturing Technology and Management, 2008
- Cutting performance of time-modulated chemical vapour deposited diamond coated tool inserts during machining graphiteDiamond and Related Materials, 2006
- Evaluation of machining performance of MMC with PCBN and PCD toolsWear, 2005
- Diamond tool performance in machining metal–matrix compositesJournal of Materials Processing Technology, 2002
- Machining of an aluminum/SiC composite using diamond insertsJournal of Materials Processing Technology, 2000
- Machining of Al/SiC particulate metal-matrix compositesJournal of Materials Processing Technology, 1998