Central defects control of Ti-6Al-4V alloy with heavy section reduction during flat cross wedge rolling
Authors:
Open Access
- 1 December 2022
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1270 (1)
Abstract
Cross wedge rolling (CWR) process is expected as an efficient and innovative preforming process for the forged aero-engine blades. But it is still a grand challenge to control the process defects and the performance of the rolled parts. According to the requirements of an aero-engine Ti-6Al-4V (TC4) blade billet with heavy section reduction up to 83%, flat CWR tools were designed and optimized by the thermal-mechanical coupling finite element (FE) method. The metal flow, damage evolution, and the distribution of stress and strain during the forming process were analysed. Then, the CWR experiments were carried out on IM500 flat CWR mill under different technological conditions. The obtained rolled parts were subjected to non-destructive testing (NDT), tension tests and microstructure analysis. The results showed that the central defects, such as micropores and voids, which seriously reduce mechanical properties, occurred in some of the rolled parts more or less. The volume of central defects was closely related to the initial rolling temperature of the billets. When the heated temperature of the TC4 billet was higher than 850°C, the target rolled part without central defects can be obtained. This research work can be a reference for the single-wedge CWR forming of titanium alloy with heavy section reduction, promoting the application of CWR in the aero-engine blade preforming process.Keywords
This publication has 7 references indexed in Scilit:
- Novel damage calibration test based on cross-wedge rollingJournal of Materials Research and Technology, 2021
- Prediction of ductile fracture in skew rolling processesInternational Journal of Machine Tools and Manufacture, 2021
- The study of central cracking mechanism and criterion in cross wedge rollingInternational Journal of Machine Tools and Manufacture, 2020
- Microstructural effects on central crack formation in hot cross-wedge-rolled high-strength steel partsJournal of Materials Science, 2020
- Cavity formation in cross-wedge rolling processesJournal of Iron and Steel Research International, 2018
- Research and industrialization of near-net rolling technology used in shaft partsFrontiers of Mechanical Engineering, 2017
- Perspectives on Titanium Science and TechnologyActa Materialia, 2013