Borehole Resistance and Heat Conduction Around Vertical Ground Heat Exchangers
Open Access
- 4 May 2012
- journal article
- Published by Bentham Science Publishers Ltd. in The Open Chemical Engineering Journal
- Vol. 6 (1) , 32-40
Abstract
Borehole thermal resistance in Ground Heat Exchanger (GHE) installations is affected by several parameters such as geometrical attributes of heat exchanger in the borehole, pipes' characteristics and grout's thermal conductivity. A study is carried out to compare the values computed by Ground Loop Design (GLD) Software, GLD 2009, with three ana-lytical solutions for U-shaped tubes. The analysis is focused on dimensionless ratios of borehole geometrical parameters (borehole diameter to outside pipe diameter and shank spacing to borehole diameter) and pipes according to Standard Di-mension Ratio (SDR) and on eight common grouts. Finally, the effect of heat conduction in the borehole is examined by means of finite element analysis by Heat Transfer Module of COMSOL Multiphysics. A two-dimensional (2-D) steady-state simulation is done assuming working fluid temperatures for winter and summer conditions and typical Greek undis-turbed ground temperature in a field of four ground vertical U-tube heat exchangers surrounded by infinite ground. The temperature profile is presented and the total conductive heat flux from the pipe to the borehole wall per meter of length of ground heat exchanger is computed for pipes SDR11 (the outside diameter of the pipe is 11 times the thickness of its wall), SDR9 and SDR17 for summer working conditions and three different configurations. It is attempted to reach to comparative results for borehole thermal resistance value through different types of analysis, having considered the major factors that affect it and giving trends for the influence of each factor to the magnitude of its value. © Sagia et alKeywords
This publication has 10 references indexed in Scilit:
- Advances in heat pump systems: A reviewApplied Energy, 2010
- A review of computer tools for analysing the integration of renewable energy into various energy systemsApplied Energy, 2010
- Temperature distributions in boreholes of a vertical ground-coupled heat pump systemRenewable Energy, 2009
- Ground heat exchangers—A review of systems, models and applicationsRenewable Energy, 2007
- Arsenic speciation and uranium concentrations in drinking water supply wells in Northern Greece: Correlations with redox indicative parameters and implications for groundwater treatmentScience of The Total Environment, 2007
- Exergoeconomic analysis of geothermal district heating systems: A case studyApplied Thermal Engineering, 2007
- Neural network and genetic programming for modelling coastal algal bloomsInternational Journal of Environment and Pollution, 2006
- Combining a fuzzy optimal model with a genetic algorithm to solve multi-objective rainfall–runoff model calibrationJournal of Hydrology, 2002
- Conduction of Heat in SolidsPhysics Today, 1962
- Heat Conduction with Engineering, Geological, and Other ApplicationsPhysics Today, 1955