Evaluation of a Mining Waste as an Oxygen Carrier for Syngas Production Using Chemical Looping in a 3 kWh Fluidized Bed Reactor
Authors:
Open Access
- 4 September 2025
- journal article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (38) , 43391-43403
Abstract
The development of chemical looping (CL) technology depends on oxygen carriers; hence, the purpose of this study is to evaluate the potential of an inexpensive, readily available, and unexplored mining waste for syngas synthesis. In this study, we examined the application of chromite overburden, a byproduct of mining, as an oxygen carrier for the chemical looping reforming of methane. The efficiency of the oxygen carrier was assessed at 750 °C by conducting redox cycles in a fluidized bed reactor, using methane and air as reducing and oxidizing agents, respectively. The reactivity study revealed sustained formation of H2 and CO gases during the reforming process of methane. Phase characterization of the r-oxidized and reduced samples using XRD and SEM unambiguously demonstrated the development of stable phases of chromite and iron oxide, respectively. Phase characterization indicated the formation of a chromite phase after the first oxidation cycle, limiting oxygen transport and slightly reducing the reaction efficiency. The phase analysis showed an overall oxide conversion of 11.11% during the redox cycles. Surface morphologies of unreacted and reacted samples showed no sign of attrition or agglomeration in 20 cycles. Overall, COB achieved a total hydrogen yield of 2736 mL per 10 g OC, with an average H2/CO ratio of 0.87, proving its effectiveness in multicycle chemical looping reforming (CLR). The gas analysis indicated the reduction reactions followed a 3-stage mechanism, i.e., decomposition of methane into carbon and hydrogen, reduction of Fe oxide by H2, CO, and C, and auxiliary reactions involving H2O, CO, CO2, and C. The present work successfully demonstrates the application of chromite overburden (COB) as an oxygen carrier in the production of syngas via a chemical looping reforming scheme.Keywords
Funding Information
- Ministry of Mines, Government of India (SNTMOM/448/2021)
This publication has 35 references indexed in Scilit:
- Energy use of biogas through chemical looping technologies with low-cost oxygen carriersFuel, 2023
- Effect of the Fe content on the behavior of synthetic oxygen carriers in a 1.5 kW biomass chemical looping gasification unitFuel, 2022
- Reaction mechanism of methane conversion over Ca2Fe2O5 oxygen carrier in chemical looping hydrogen productionFuel, 2021
- Biomass chemical looping gasification for syngas production using ilmenite as oxygen carrier in a 1.5 kWth unitChemical Engineering Journal, 2021
- Iron oxide supported on silicalite-1 as a multifunctional material for biomass chemical looping gasification and syngas upgradingChemical Engineering Journal, 2020
- Chemical-looping technologies using circulating fluidized bed systems: Status of developmentFuel Processing Technology, 2018
- Utilization of Menteş iron ore as oxygen carrier in Chemical-Looping CombustionEnergy, 2017
- Kinetics of the reduction of hematite (Fe2O3) by methane (CH4) during chemical looping combustion: A global mechanismChemical Engineering Journal, 2013
- A study on improving reactivity of Cu-ferrite/ZrO2 medium for syngas and hydrogen production from two-step thermochemical methane reformingInternational Journal of Energy Research, 2009
- An x‐ray photoelectron spectroscopic study of some chromium–oxygen systemsSurface and Interface Analysis, 1988