Compensation of input current distortion in three-phase buck rectifiers
Authors:
- 1 March 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10482334,p. 930-938
Abstract
An overlap time for two commutating switches is necessary to prevent current interruption in a three-phase buck rectifier, but it may cause input current distortion. In this paper, a modified pulse-based compensation method is proposed to compensate for the overlap time. In addition to the traditional method which places the overlap time based on the voltage polarity, this new method first minimizes the overlap time to reduce its effect and then compensates the pulse width according to the sampled voltage and current. It is verified by experiments that the proposed method has better performance than the traditional method, especially when the line-to-line voltage crosses zero. Another distortion comes from the irregular pulse distribution when two sectors change in a 12-sector space vector PWM. This paper proposes two compensation methods for that scenario as well, compensating the duty cycle and increasing switching frequency near the boundaries of two sectors. It is shown through experiments that both methods can reduce the input current distortion in the buck rectifier.Keywords
This publication has 12 references indexed in Scilit:
- Modulation scheme analysis for high efficiency three-phase buck rectifier considering different device combinations2012
- Design and performance of an all-SiC three-phase buck rectifier for high efficiency data center power supplies2012
- Evaluation of SiC MOSFETs for a high efficiency three-phase buck rectifier2012
- Towards a 99% Efficient Three-Phase Buck-Type PFC Rectifier for 400-V DC Distribution SystemsIEEE Transactions on Power Electronics, 2011
- Improved charge control with adjustable input power factor and optimized switching pattern for a 150 kHz three-phase buck rectifierAPEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition, 2008
- Commutation in a High Power IGBT Based Current Source Inverter2007
- Improving mains current quality for three-phase three-switch buck-type PWM rectifiersIEEE Transactions on Power Electronics, 2006
- High‐Power Converters and ac Drives2005
- Optimal vector modulation of a PWM current source converter according to minimal switching losses2002
- A new soft-switching technique using a modified PWM scheme requiring no extra hardwareIEEE Transactions on Power Electronics, 2001