Stress analyses of joint arthroplasty in the proximal humerus
Authors:
- 1 January 1985
- journal article
- research article
- Published by Wiley in Journal of Orthopaedic Research
- Vol. 3 (3) , 360-371
Abstract
Finite element stress analyses were performed on the proximal humerus before and after the simulated implantation of stemmed, metallic prosthetic components with porous sintered surfaces for direct bony attachment. Design geometries with surfaces at the prosthetic head/bone interface that were (a) convex, (b) flat, and (c) concave were studies. Analyses for each of the three geometries were conducted to reflect (a) bone ingrowth on all the prosthesis/bone surfaces and (b) bone ingrowth only along the underside of the prosthetic humeral head (assuming the stem was not coated with a porous material). Three loading conditions were used to model various degrees of abduction of the arm. Results indicated that in the normal humerus the compressive joint forces are transmitted from the articular surface through cancellous bone to the inferior cortical shell. Concentration of the rotator cuff muscles created tensile stresses in the superolateral cancellous bone and the superior cortical shell of the humerus. Results of the implanted numeral component models indicated that the use of a prosthesis with bone ingrowth along the stem would cause marked stress shielding proximally whereas the use of implants with porous ingrowth only on the underside of the humeral head replacement produced stress fields more similar to the normal humerus. The convex, flat, and concave surfaces provided similar load transfer from the component to the underlying bone in all loading cases. Other prosthetic head designs that may offer better initial stability produced stress fields similar to those of existing prostheses.Keywords
This publication has 14 references indexed in Scilit:
- Stress changes in the femoral head due to porous ingrowth surface replacement arthroplastyJournal of Biomechanics, 1984
- A survey of finite element analysis in orthopedic biomechanics: The first decadeJournal of Biomechanics, 1983
- Porous Ingrowth Fixation of the Femoral Component in a Canine Surface Replacement of the HipClinical Orthopaedics and Related Research, 1982
- Stress distributions in the acetabular region—I. Before and after total joint replacementJournal of Biomechanics, 1982
- UCLA Anatomic Total Shoulder ArthroplastyClinical Orthopaedics and Related Research, 1981
- Forces at the Glenohumeral Joint in AbductionClinical Orthopaedics and Related Research, 1978
- “Floating‐socket” total shoulder replacement: Anatomical, biomechanical, and surgical rationaleJournal of Biomedical Materials Research, 1978
- The compressive behavior of bone as a two-phase porous structureJournal of Bone and Joint Surgery, 1977
- Status of Total Shoulder ArthroplastyArchives of Surgery, 1977
- Force analysis of individual muscles acting simultaneously on the shoulder joint during isometric abductionJournal of Biomechanics, 1973