Design and investigation of stability‐ and power‐improved 11T SRAM cell for low‐power devices
- 4 July 2022
- journal article
- research article
- Published by Wiley in International Journal of Circuit Theory and Applications
- Vol. 50 (11) , 3827-3845
Abstract
The modern system‐on‐chips require stable and low‐power SRAM cells due to technology scaling and limited sources of energy. Therefore, a stability‐ and power‐improved 11T SRAM cell is proposed in this study. The proposed cell core is composed of a strong cross‐coupled structure of a conventional inverter with a N‐type stacked transistor and a Schmitt‐trigger (ST) with a double channel‐length pull‐up network. This coupled with a separate read path enhances the read static noise margin (RSNM). Moreover, a feedback‐cutting N‐type transistor is placed inside the cell core to improve the write static noise margin (WSNM)/write margin (WM). Though the presence of stacked transistors in access paths increases read delay (TRA)/write delay (TWA), it reduces leakage. This metric further minimizes with the aid of a stacked structure of latch core and double channel‐length of pull‐up transistor in the ST inverter. The moderate read/write frequency and single‐ended structure of the suggested cell result in low dynamic power. Simulated results by using 16‐nm CMOS at VDD = 0.7 V show that the proposed cell has the second‐best RSNM/WSNM, which is 4.65/1.44 times higher than that of the fully differential 8T (FD8T) cell, as the basic cell. Moreover, it reduces leakage power by at least 2.01 times and consumes moderate read/write power, nearly 1.44/1.81 times lower than that of FD8T cell, at the cost of 1.61 times area overhead. The proposed cell can eliminate read/write‐half‐select‐disturbance issues to support bit‐interleaving architecture to increase soft error immunity.Keywords
This publication has 36 references indexed in Scilit:
- Stable, Reliable, and Bit-Interleaving 12T SRAM for Space Applications: A Device Circuit Co-DesignIEEE Transactions on Semiconductor Manufacturing, 2017
- Half-Select Free and Bit-Line Sharing 9T SRAM for Reliable Supply Voltage ScalingIEEE Transactions on Circuits and Systems I: Regular Papers, 2017
- Power-Gated 9T SRAM Cell for Low-Energy OperationIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2016
- 9-T SRAM Cell for Reliable Ultralow-Power Applications and Solving Multibit Soft-Error IssueIEEE Transactions on Device and Materials Reliability, 2016
- Single-Ended Schmitt-Trigger-Based Robust Low-Power SRAM CellIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2016
- Design of an Ultra-low Voltage 9T SRAM With Equalized Bitline Leakage and CAM-Assisted Energy Efficiency ImprovementIEEE Transactions on Circuits and Systems I: Regular Papers, 2014
- An 8T Low-Voltage and Low-Leakage Half-Selection Disturb-Free SRAM Using Bulk-CMOS and FinFETsIEEE Transactions on Electron Devices, 2014
- Low-Power Multiport SRAM With Cross-Point Write Word-Lines, Shared Write Bit-Lines, and Shared Write Row-Access TransistorsIEEE Transactions on Circuits and Systems II: Express Briefs, 2014
- Ultralow-Voltage Process-Variation-Tolerant Schmitt-Trigger-Based SRAM DesignIEEE Transactions on Very Large Scale Integration (VLSI) Systems, 2011
- A 32 kb 10T Sub-Threshold SRAM Array With Bit-Interleaving and Differential Read Scheme in 90 nm CMOSIEEE Journal of Solid-State Circuits, 2009