Studies of invar alloys sintered from powders mixtures
Authors:
- E. V. AbdulmenovaEAE. V. Abdulmenova
- S. N. KulkovSKS. N. Kulkov
- 19 November 2019
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2167 (1) , 020002
Abstract
In this work studies of the alloys sintered by powder metallurgy method are presented. Samples were obtained from mixtures of powders Fe and Ni (30–40 wt % Ni) after ball-mill treatment, cold pressing and sintered in a vacuum furnace. It has been shown that the face centered cubic and body centered cubic (no more than 5%) alloys are formed at sintering of powders mixture. The lattice parameter of the γ-phase depends on content of Ni and increases from 3.585×10−10 to 3.596−10 m, these lattice parameters correspond to well-known invar alloys. The hardness of sintered samples changes from 0.8 to 1.5 GPa, the Young’s modulus changes from 83 to 126 GPa that correspond to values obtained for invar alloy in literature. The coefficient of thermal expansion is 1.1×10−6°С−1 for interval 0–150°С and is 15.8 × 10−6°С–1 for interval 300–500°С and this change corresponds to magnetic transformation at 225°С. So, alloys obtained by sintering of powders Fe and Ni are formed as invar alloy and its properties are typical of cast alloys.This publication has 10 references indexed in Scilit:
- Development of personalized approach to the reconstruction of bone tissue defects using porous ceramic osteoimplantsIOP Conference Series: Materials Science and Engineering, 2019
- INVESTIGATION OF PHYSICAL MECHANICAL PROPERTIES AND TEMPERATURES OF PHASE TRANSFORMATIONS OF POWDER FE-NI ALLOYSPNIPU Bulletin. The Mechanical Engineering, Materials Science, 2017
- Mechanical and functional properties of Invar alloy forμ-MIMPowder Metallurgy, 2013
- Metal powder injection molding (MIM): key trends and markets2012
- Markets applications, and financial aspects of global metal powder injection moulding (MIM) technologiesMetal Powder Report, 2012
- Lattice parameter determination using a curved position-sensitive detector in reflection geometry and application to Smx/2Ndx/2Ce1–xO2–δceramicsJournal of Applied Crystallography, 2009
- Synthesis of controlled-chemistry ultrafine FexNi1−x ferromagnetic powdersJournal of Alloys and Compounds, 2005
- Physical, Technological, and Magnetic Properties of Powder Iron-Nickel AlloysPowder Metallurgy and Metal Ceramics, 2003
- Angular dependence of sputtering for nickel in ferro and paramagnetic statesVacuum, 2001
- Electron irradiation effects on iron-nickel invar alloysJournal of Magnetism and Magnetic Materials, 1979