Measurement of microbump thermal resistance in 3D chip stacks
Authors:
- 1 March 2012
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Abstract
The thermal resistance of Pb-free ~25 μm diameter microbumps with pitches of 50, 71, and 100 μm has been measured with and without underfill in four high chip stacks. With underfill, the unit thermal resistance values were 8.0, 15.5, and 19.0 C-mm 2 /W for 50, 71, and 100 μm pitch microbumps, respectively. The average microbump height was 16.1 microns. For the 50 μm pitch case, the thermal conduction through the underfill is roughly equal to that of the microbumps alone.Keywords
This publication has 11 references indexed in Scilit:
- Back-End-of-Line and Micro-C4 Thermal Resistance Contributions to 3-D Stack PackagesIEEE Transactions on Components, Packaging and Manufacturing Technology, 2011
- 3D Chip stacking with 50 μm pitch lead-free micro-c4 interconnections2011
- Characterization of the thermal impact of Cu-Cu bonds achieved using TSVs on hot spot dissipation in 3D stacked ICs2011
- Experimental thermal resistance evaluation of a three-dimensional (3D) chip stack2011
- Thermal resistance evaluation of a three-dimensional (3D) chip stack2010
- Analytical and Numerical Modeling of the Thermal Performance of Three-Dimensional Integrated CircuitsIEEE Transactions on Components and Packaging Technologies, 2009
- Three-dimensional silicon integrationIBM Journal of Research and Development, 2008
- Thermo-Mechanical Challenges in Stacked PackagingHeat Transfer Engineering, 2008
- Challenges for 3D IC integration: bonding quality and thermal management2007
- Die Stacking (3D) Microarchitecture2006