Design of a hybrid A-sandwich radome using a strongly coupled frequency selective surface element
- 10 February 2020
- journal article
- research article
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 12 (8) , 738-748
Abstract
The airborne radomes have to cater superior electromagnetic (EM) performance with bandpass characteristics of stealth application. In this regard, a hybrid A-sandwich radome is proposed in this paper. The proposed radome consists of a novel strongly coupled frequency selective surface (FSS) core sandwiched between two dielectric layers (acts as skin) to form an A-sandwich structure. The dielectric layers are cascaded in such a way that the middle layer has less dielectric parameters than the skin dielectric. The core layer comprises a modified FSS array using strongly coupled FSS layers through a series of metallic vias. This strongly-coupled FSS element will have the advantage of eliminating inter-element interference and improves the EM performance characteristics of the structure. The structure exhibits very good band-pass characteristics (>90%) at a normal impinging angle with sharp roll-off characteristics. To show the efficacy of the proposed structure, the transmission loss has been compared with that of conventional A-sandwich radomes at 0°, 50° incidence angle for both TE and TM polarization. Conformal analysis of the unit cell has been carried out, and sector-wise thickness optimization was performed to analyze the structure for the conformal shaped radome application. Finally, a physical prototype has been fabricated and measured its scattering parameters, radiation characteristics in a fully shielded anechoic chamber. The results are encouraging and prove its suitability for radome application.Keywords
This publication has 22 references indexed in Scilit:
- Electromagnetic Performance Analysis of Graded Dielectric Inhomogeneous Streamlined Airborne RadomeIEEE Transactions on Antennas and Propagation, 2017
- Electromagnetic Techniques and Design Strategies for FSS Structure Applications [Antenna Applications Corner]IEEE Antennas and Propagation Magazine, 2015
- Air-Filled Substrate Integrated Waveguide for Low-Loss and High Power-Handling Millimeter-Wave Substrate Integrated CircuitsIEEE Transactions on Microwave Theory and Techniques, 2015
- A Study of Ultra-Thin Single Layer Frequency Selective Surface Microwave Absorbers With Three Different Bandwidths Using Double ResonanceIEEE Transactions on Antennas and Propagation, 2014
- Electromagnetic Design and Performance Analysis of Airborne Radomes: Trends and Perspectives [Antenna Applications Corner]IEEE Antennas and Propagation Magazine, 2014
- A novel substrate integrated waveguide slot antenna with high power-handling capacity2014
- A NOVEL EM ANALYSIS OF DOUBLE-LAYERED THICK FSS BASED ON MM-GSM TECHNIQUE FOR RADOME APPLICATIONSProgress In Electromagnetics Research Letters, 2012
- Loaded frequency selective surfaces using substrate integrated waveguide technologyMicrowave and Optical Technology Letters, 2008
- Efficient and accurate design of substrate-integrated waveguide circuits synthesised with metallic via-slot arraysIET Microwaves, Antennas & Propagation, 2008
- On the Theory of Self-Resonant GridsBell System Technical Journal, 1975