Surface modification of nanohydroxyapatite and its loading effect on polylactic acid properties for load bearing implants
- 26 January 2017
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 39 (8) , 2880-2888
Abstract
Blends of polylactic acid (PLA) and nanohydroxyapatite (NHA) were prepared through melt‐mixing by varying the composition of NHA from 1 to 5 wt%. The tensile properties of the PLA‐1 wt% NHA nanocomposite exhibited higher values than neat PLA. Beyond 1 wt% NHA, a drop in tensile properties of the PLA–NHA nanocomposites was observed due to agglomeration and poor interfacial adhesion between NHA and PLA. Therefore, NHA was surface modified (mNHA) using three different surface modifiers namely, 3‐aminopropyl triethoxysilane (APTES), sodium n‐dodecyl sulfate (SDS) and polyethylenimine (PEI). The surface treatment of NHA was studied through Fourier transform infrared spectroscopy (FTIR) and energy dispersive X‐ray (EDX). Results revealed that the tensile properties increased in order of PLA‐5 wt% mNHA (APTES) followed by PLA‐5 wt% mNHA (SDS), whereas PEI modified NHA resulted in lower tensile properties. Further, increasing mNHA loading to 30 wt%, decreased the tensile strength due to agglomeration of mNHA. POLYM. COMPOS., 39:2880–2888, 2018. © 2016 Society of Plastics EngineersKeywords
Funding Information
- University of Nottingham, Malaysia, Research Grant and also the technical staffs of Nuclear Malaysia in carrying out the lab work (UNR30005)
This publication has 25 references indexed in Scilit:
- Organically Modified Silica Nanoparticles Interaction with Macrophage Cells: Assessment of Cell Viability on the Basis of Physicochemical PropertiesJournal of Pharmaceutical Sciences, 2015
- Biomaterials for Bone Tissue Engineering2013
- Hydroxyapatite, a biomaterial: Its chemical synthesis, characterization and study of biocompatibility prepared from shell of garden snail, Helix aspersaBulletin of Materials Science, 2012
- Nano-hydroxyapatite/poly(l-lactic acid) composite synthesized by a modified in situ precipitation: preparation and propertiesJournal of Materials Science: Materials in Medicine, 2010
- Nanocomposites for Bone Tissue Engineering2010
- Hydroxyapatite-reinforced polymer biocomposites for synthetic bone substitutesJOM, 2008
- The effect of filler surface modification and processing conditions on distribution behaviour of silica nanofillers in polyestersColloid and Polymer Science, 2007
- Processing of hydroxyapatite reinforced ultrahigh molecular weight polyethylene for biomedical applicationsBiomaterials, 2005
- Structure and properties of nano-hydroxyapatite/polymer composite scaffolds for bone tissue engineeringBiomaterials, 2004
- Impact and wear resistance of polymer nanocomposites at low filler contentPolymer Engineering & Science, 2002