Sensorless Predictive DTC of a Surface-Mounted Permanent-Magnet Synchronous Machine Based on Its Magnetic Anisotropy
- 4 May 2012
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 60 (8) , 3016-3024
Abstract
This paper introduces a sensorless predictive direct torque control (PDTC) scheme for surface-mounted permanent-magnet synchronous machines, which is able to operate at a wide range of speeds. At very low and zero speeds of operation, the identification of the rotor position is carried out by applying test voltage signals in order to detect the machine saliency produced by the stator magnetic saturation. Then, the acquired signals that contain the information of the rotor position are digitally processed by means of a quadrature phase-locked-loop tracking observer. At middle and high speeds, the angular position of the rotor is estimated by using a closed-loop sliding-mode observer of the stator flux which uses reconstructed stator voltages and measured stator currents. Then, a gradual changeover between both algorithms is used for coupling both estimated values of the rotor position. Following this strategy, no extra hardware, special current transducers, or additional connections are required in comparison with a standard drive with an encoder. Experimental results in a wide speed range verify high performance of the proposed encoderless PDTC scheme.Keywords
This publication has 36 references indexed in Scilit:
- Sensorless-predictive torque control of the PMSM using a Reduced Order Extended Kalman Filter2011
- Position Sensorless Control of PM Synchronous Motors Based on Zero-Sequence Carrier InjectionIEEE Transactions on Industrial Electronics, 2011
- Suppression of Saturation Effects in a Sensorless Predictive Controlled Synchronous Reluctance Machine Based on Voltage Space Phasor InjectionsIEEE Transactions on Industrial Electronics, 2010
- Active Flux Concept for Motion-Sensorless Unified AC DrivesIEEE Transactions on Power Electronics, 2008
- Encoderless Predictive Direct Torque Control for Synchronous Reluctance Machines at Very Low and Zero SpeedIEEE Transactions on Industrial Electronics, 2008
- Position Control of an Interior Permanent-Magnet Synchronous Motor Without Using a Shaft Position SensorIEEE Transactions on Industrial Electronics, 2007
- Combining INFORM method, voltage model and mechanical observer for sensorless control of PM synchronous motors in the whole speed range including standstille+i Elektrotechnik und Informationstechnik, 2006
- Optimized INFORM Measurement Sequence for Sensorless PM Synchronous Motor Drives With Respect to Minimum Current DistortionIEEE Transactions on Industry Applications, 2004
- Extended kalman filter tuning in sensorless PMSM drivesIEEE Transactions on Industry Applications, 2003
- Sensorless initial rotor position estimation of surface permanent-magnet synchronous motorIEEE Transactions on Industry Applications, 2000