New solid-state Marx topology for bipolar repetitive high-voltage pulses
- 1 June 2008
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02759306,p. 791-795
Abstract
A novel bipolar high-voltage modulator topology, based on the Marx generator concept, is proposed for high-voltage repetitive pulsed power applications. The proposed topology is a generalized version of the negative and positive all-solid-state Marx modulator concepts, which takes advantage of the intensive use of power semiconductor switches to increase the performance of the classical circuit, strongly reducing losses and increasing the pulse repetition frequency. Additionally, the proposed topology enables the use of typical half-bridge semiconductor structures while ensuring that the maximum voltage blocked by the semiconductors is the voltage of the capacitor in each stage. Due to semiconductor topology used the output voltage is very flexible. Hence, it is possible to change from negative to positive unipolar to bipolar pulse, with different duty cycles and different switching patterns. Experimental results are presented and discussed. A laboratory prototype with 10 kW peak power, of this bipolar solid-state modulator circuit, was assembled 1200 V IGBTs and diodes, operating with 1000 V d-c input voltage and 10 kHz frequency, giving 2 kV bipolar pulses, 5 A, with 5 mus into a resistive load.Keywords
This publication has 7 references indexed in Scilit:
- All Silicon Marx-bank Topology for High-voltage, High-frequency Rectangular Pulses2005
- A Combined Wide and Narrow Pulse Generators for Processing Microbes2005
- A solid state high voltage pulse modulator which is compact and without oil or a pulse transformer2004
- Transformerless capacitive coupling of gate signals for series operation of power MOS devicesIEEE Transactions on Power Electronics, 2000
- Distributed magnetic coupling synchronizes a stacked 25-kV MOSFET switchIEEE Transactions on Power Electronics, 2000
- Series operation of power MOSFETs for high-speed, high-voltage switching applicationsReview of Scientific Instruments, 1993
- A bipolar pulse tester for semiconductor devicesJournal of Physics E: Scientific Instruments, 1986