Handle Dynamics Predictions for Selected Power Hand Tool Applications
Authors:
- 1 December 2003
- journal article
- research article
- Published by SAGE Publications in Human Factors: The Journal of the Human Factors and Ergonomics Society
- Vol. 45 (4) , 645-656
Abstract
This study uses a previously developed single-degree-of-freedom mechanical model to predict the power hand tool operator handle kinematic response to impulsive reaction forces (Lin, 2001). The model considers the human operator as a lumped parameter passive mechanical system, consisting of stiffness, mass moment of inertia, and viscous damping elements. Six power nutrunners were operated by 9 volunteers (3 men, 6 women) in the laboratory, and corresponding handle kinematics were compared against model predictions. A full-factorial experiment considered torque buildup time and work location. Normalized forearm flexor EMG was measured to quantify muscle exertions and used to proportionally adjust the stiffness parameter. The measured handle displacement for actual tool operation strongly correlated to the model predictions ( R = .98) for all handle configurations. The overall model prediction error was 3% for predicting tool handle responses to impulsive reaction forces for various tool and workstation parameters. This model should make it possible for designers to identify conditions that minimize the torque reaction experienced by power hand tool operators.Keywords
This publication has 33 references indexed in Scilit:
- Dynamic biomechanical model of the hand and arm in pistol grip power handtool usageErgonomics, 2001
- Muscle responses to simulated torque reactions of hand-held power toolsErgonomics, 1999
- The influence of target torque and torque build-up time on physical stress in right angle nutrunner operationErgonomics, 1998
- Exercise-induced skeletal muscle damage and adaptation following repeated bouts of eccentric muscle contractionsJournal of Sports Sciences, 1997
- An improved biomechanical model for simulating the strain of the hand-arm system under vibration stressJournal of Biomechanics, 1991
- Muscle response to pneumatic hand tool torque reaction forcesErgonomics, 1989
- Regulation of wrist stiffness by the stretch reflexJournal of Biomechanics, 1989
- Hand tool injuries at work: A surveillance perspectiveJournal of Safety Research, 1988
- Hand-arm vibration part III: A distributed parameter dynamic model of the human hand-arm systemJournal of Sound and Vibration, 1978
- Dynamic response of the hand-arm system to a sinusoidal inputJournal of Sound and Vibration, 1972