Adhesion property of sulfonated poly(arylene ether sulfone)s
Authors:
- 4 May 2004
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 93 (3) , 1211-1218
Abstract
Sulfonated poly(arylene ether sulfone)s (S‐PESs) were synthesized from sulfonated 4,4′‐dichlorodiphenylsulfone (S‐DCDPS), 4,4′‐dichlorodiphenylsulfone (DCDPS), and 4,4′‐biphenol through variations in the molar ratio of S‐DCDPS to DCDPS from 10/90 to 40/60. The S‐PES sodium form was characterized with Fourier transform infrared, 1H‐NMR, thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis, and the intrinsic viscosity and solubility were also evaluated. The sodium form was then subjected to acidification by immersion in 1.5M HCl for 24 h at room temperature, which was followed by washing with deionized water. The S‐PES adhesive properties were measured with single laboratory shear samples with aluminum alloys, and the failure mode was investigated. The synthesized S‐PESs exhibited increased glass‐transition temperatures with increased S‐DCDPS/DCDPS ratios; their acid forms provided much lower glass‐transition temperatures than their sodium forms. In addition, the S‐PES sodium form exhibited a high intrinsic viscosity, which indicated a high molecular weight. The S‐PES acid form exhibited an adhesion strength similar to that of the sodium form, and the single‐lap‐shear strength increased with 10% S‐PES and then decreased with 20, 30, and 40% S‐PES. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1211–1218, 2004Keywords
This publication has 15 references indexed in Scilit:
- Polymeric proton conducting membranes for medium temperature fuel cells (110–160°C)Journal of Membrane Science, 2001
- Ionomeric membranes for proton exchange membrane fuel cell (PEMFC): sulfonated polysulfone associated with phosphatoantimonic acidJournal of Membrane Science, 2001
- Recent advances in the functionalisation of polybenzimidazole and polyetherketone for fuel cell applicationsJournal of Membrane Science, 2001
- Soluble sulfonated naphthalenic polyimides as materials for proton exchange membranesPolymer, 2001
- Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applicationsJournal of Membrane Science, 2000
- Sulfonated polysulfone as promising membranes for polymer electrolyte fuel cellsJournal of Applied Polymer Science, 2000
- Modification of Nafion Proton Exchange Membranes to Reduce Methanol Crossover in PEM Fuel CellsElectrochemical and Solid-State Letters, 1999
- Proton Conductivity in Nafion® 117 and in a Novel Bis[(perfluoroalkyl)sulfonyl]imide Ionomer MembraneJournal of the Electrochemical Society, 1998
- Membrane‐Supported Nonvolatile Acidic Electrolytes Allow Higher Temperature Operation of Proton‐Exchange Membrane Fuel CellsJournal of the Electrochemical Society, 1997
- The sodium salts of sulphonated poly(aryl-ether-ether-ketone) (PEEK): Preparation and characterizationPolymer, 1987