Power Delivery Network Modeling and Benchmarking for Emerging Heterogeneous Integration Technologies
- 29 July 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (9) , 1825-1834
Abstract
In this article, a power delivery network (PDN) modeling framework for heterogeneous integration platforms is presented, which includes both IR-drop and transient analysis. The model is validated using IBM power grid benchmarks, and maximum relative errors are less than 7.3%. To evaluate interposer and bridge-chip-based integration platforms, we assume a field-programmable gate array (FPGA)-CPU 2.5-D integration platform, of which the FPGA consumes 45 W and the CPU consumes 75 W. The simulation results show that an interposer with dense power/ground grid and microbumps can suppress power supply noise (PSN) by a small margin with the requirement of high-density through-silicon vias (TSVs). For bridge-chip-based integration, under the assumption that the active dice above the bridge-chips are not connected to the package power/ground planes, some PDN challenges are evaluated. Using multiple bridge-chips and smaller overlap areas between the bridge-chips and the active dice, the worst-case PSN in bridge-chip-based integration is minimized. Next, we perform parametric studies for these 2.5-D integration platforms as a function of C4 bump pitch and metal layers. Lastly, we propose to use TSVs in the bridgechip to reduce PSN. With nine bundled TSVs of 8 μm diameter, the IR-drop of bridge-chip-based integration technologies is only 1% higher than the standalone case.Keywords
Funding Information
- National Science Foundation (CCF-1302297)
This publication has 19 references indexed in Scilit:
- Signal and power integrity analysis in 2.5D integrated circuits (ICs) with glass, silicon and organic interposer2015
- Modeling and Analysis of PDN Impedance and Switching Noise in TSV-Based 3-D IntegrationIEEE Transactions on Electron Devices, 2015
- Analysis and optimization of a power distribution network in 2.5D IC with glass interposer2014
- Silicon Effect-Aware Full-Chip Extraction and Mitigation of TSV-to-TSV CouplingIEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 2014
- A Heterogeneous 3D-IC Consisting of Two 28 nm FPGA Die and 32 Reconfigurable High-Performance Data ConvertersIEEE Journal of Solid-State Circuits, 2014
- MATEX2014
- A reconfigurable fabric for accelerating large-scale datacenter services2014
- Architecture implications of pads as a scarce resource2014
- Electrical–Thermal Cosimulation With Nonconformal Domain Decomposition Method for Multiscale 3-D Integrated SystemsIEEE Transactions on Components, Packaging and Manufacturing Technology, 2013
- Understanding Voltage Variations in Chip Multiprocessors using a Distributed Power-Delivery Network2007