Design and application of a 1200V ultra-fast integrated Silicon Carbide MOSFET module
Authors:
- 1 March 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2063-2070
Abstract
With the commercial introduction of wide bandgap power devices such as Silicon Carbide (SiC) and Gallium Nitride (GaN) in the last few years, the high power and high frequency power electronics applications have gained more attention. The fast switching speed and high temperature features of SiC MOSFET break the limit of the traditional silicon MOSFET. However, the EMI problem under high dI/dt and dV/dt is an unneglectable problem. The overshoot and oscillation on drain-source voltage and gating signal could cause breakdown of the switches. This paper proposes a 1200V integrated SiC MOSFET module. With the ultra-fast gate driver integrated with the SiC MOSFET, the parasitic inductance and capacitance could be reduced dramatically, which accordingly suppress the EMI problem caused by the parasitic parameters. Thus zero gate resistance could be adopted in the module to further increase the switching speed. The switching performance of the integrated SiC module is shown better than the discrete package device. The switching loss of the SiC MOSFET module is measured by the inverter level measurement and composition method. Zero switching loss could be achieved when the drain current is lower than a critical value. The module has been tested at 1.5MHz and 3.38MHz switching frequency to prove its high speed capability. For isolated topology applications, the impact of high frequency on the power density and efficiency is discussed in this paper.Keywords
This publication has 11 references indexed in Scilit:
- Comparative evaluation of 6kV Si and SiC power devices for medium voltage power electronics applications2015
- Distributed energy storage device based on a novel bidirectional Dc-Dc converter with 650V GaN transistors2015
- Development of packaging technologies for advanced SiC power modules2014
- Optimal design methodology of bidirectional LLC resonant DC/DC converter for solid state transformer application2014
- High Current Ripple for Power Density and Efficiency Improvement in Wide Bandgap Transistor-Based Buck ConvertersIEEE Transactions on Power Electronics, 2014
- A 1200-V, 60-A SiC MOSFET Multichip Phase-Leg Module for High-Temperature, High-Frequency ApplicationsIEEE Transactions on Power Electronics, 2014
- Accurate switching energy estimation of wide bandgap devices used in converters for aircraft applications2013
- Computer-Aided Design and Optimization of High-Efficiency LLC Series Resonant ConverterIEEE Transactions on Power Electronics, 2012
- High frequency bus converter with low loss integrated matrix transformer2012
- SiC versus Si—Evaluation of Potentials for Performance Improvement of Inverter and DC–DC Converter Systems by SiC Power SemiconductorsIEEE Transactions on Industrial Electronics, 2010